Difficulty

Easy

Steps

8

Time Required

                          15 minutes

Sections

1

  • Camera lens
  • 8 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackPanasonic Lumix DMC-ZS25

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Camera lens
  • Open the four 3.40 mm screws from the right and left sides of your Panasonic Lumix Camera.
  • Remove the two 2.60 mm screws located next to the battery.

Open the four 3.40 mm screws from the right and left sides of your Panasonic Lumix Camera.

Remove the two 2.60 mm screws located next to the battery.

1024

Step 2

  • Use the iFixit opening tool to open the outer cover of your device.
  • The easiest place to open your device is from the HDMI port.
  • Gently open it to avoid breaking the cover.

Use the iFixit opening tool to open the outer cover of your device.

The easiest place to open your device is from the HDMI port.

Gently open it to avoid breaking the cover.

Step 3

  • Use a spudger to detach the ribbon cable.
  • Be careful when using the spudger, as it can cause damage to the ribbon.
  • After releasing the screen cable, use the iFixit opening tool to lift the button board.
  • Once you hear a “click” sound, you have successfully opened the buttons board.

Use a spudger to detach the ribbon cable.

Be careful when using the spudger, as it can cause damage to the ribbon.

After releasing the screen cable, use the iFixit opening tool to lift the button board.

Once you hear a “click” sound, you have successfully opened the buttons board.

Step 4

  • Remove the screen using the iFixit opening tool.

Remove the screen using the iFixit opening tool.

Step 5

  • Open the two 4.20 mm screws to remove the inner cover located beneath the screen.
  • Use the iFixit opening tool to assist in safely removing the inner cover.

Open the two 4.20 mm screws to remove the inner cover located beneath the screen.

Use the iFixit opening tool to assist in safely removing the inner cover.

Step 6

  • Separate the device into two pieces as shown.

Separate the device into two pieces as shown.

Step 7

  • Remove the side cover using the iFixit opening tool.
  • Exercise caution when you remove the front cover as damage to the device can occur.

Remove the side cover using the iFixit opening tool.

Exercise caution when you remove the front cover as damage to the device can occur.

Step 8

  • Use the spudger to unlock the screen cables from the circuit bored. Carefully, lift up the black clip up to release the cables.
  • Use your hands to remove the lens.

Use the spudger to unlock the screen cables from the circuit bored. Carefully, lift up the black clip up to release the cables.

Use your hands to remove the lens.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors 


                    Abbas Khan

Member since: 01/21/2015

482 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 9-5, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 9-5, Brown Winter 2015 



                    USFT-BROWN-W15S9G5                     


                                            3 Members                     


                                            7 Guides authored