Difficulty
Easy
Steps
10
Time Required
15 minutes
Sections
1
- Power Button
- 10 steps
Flags
0
BackPanasonic Lumix DMC-ZS25
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
As the camera is used more often, the power button can begin to fail due to the constant use of it.
Make sure the new power button is of the right size to ensure a successful replacement.
Before using this guide, make sure the camera is unplugged from any connection and inspect the camera for any defects or loose wiring.
What you need
Step 1
Unscrewing your Panasonic Lumix
- Open the four 3.40 mm screws from the right and left sides of your Panasonic Lumix Camera.
- Remove the two 2.60 mm screws located next to the battery.
Open the four 3.40 mm screws from the right and left sides of your Panasonic Lumix Camera.
Remove the two 2.60 mm screws located next to the battery.
1024
Step 2
- Use the plastic opening tool to open the outer cover of your device.
- The easiest place to open your device is from the HDMI port.
- Open it gently to avoid breaking the cover.
Use the plastic opening tool to open the outer cover of your device.
The easiest place to open your device is from the HDMI port.
Open it gently to avoid breaking the cover.
Step 3
- Use a spudger to detach the ribbon cable.
- Be careful when you use the spudger because you do not want to break the the ribbon.
Use a spudger to detach the ribbon cable.
Be careful when you use the spudger because you do not want to break the the ribbon.
Step 4
- Remove the button board using the plastic opening tool.
- Remove the screen. Lift the screen from the right hand side.
- After your hear a “click” sound, you have successfully opened the screen.
Remove the button board using the plastic opening tool.
Remove the screen. Lift the screen from the right hand side.
After your hear a “click” sound, you have successfully opened the screen.
Step 5
- Remove the two black screws that are located beneath the screen.
- Lift the metal cover using the plastic opening tool.
Remove the two black screws that are located beneath the screen.
Lift the metal cover using the plastic opening tool.
Step 6
- Use the plastic opener to remove the side covers.
Use the plastic opener to remove the side covers.
Step 7
- After removing the side covers, you will be able to take away the front cover with your hands.
- Do not apply too much pressure on the outer cover of your device to avoid damage.
After removing the side covers, you will be able to take away the front cover with your hands.
Do not apply too much pressure on the outer cover of your device to avoid damage.
Step 8
- To release the top cover of the camera, you need to open the 3.70 mm screw shown in the picture.
To release the top cover of the camera, you need to open the 3.70 mm screw shown in the picture.
Step 9
- Remove the top cover using the plastic opening tool.
Remove the top cover using the plastic opening tool.
Step 10
- After removing the top cover of the camera, you will be able to easily remove the power button with your hand.
After removing the top cover of the camera, you will be able to easily remove the power button with your hand.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 10 other contributors
Abbas Khan
Member since: 01/21/2015
482 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 9-5, Brown Winter 2015
Member of USF Tampa, Team 9-5, Brown Winter 2015
USFT-BROWN-W15S9G5
3 Members
7 Guides authored
