Panasonic Lumix Dmc Zs35 Back Casing Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          10 minutes            

Sections

1

• Back Casing
• 3 steps

Flags

0

• BackPanasonic Lumix DMC-ZS35

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Before beginning, make sure to turn off your camera completely and remove its battery.

What you need

Step 1

              Back Casing               

• Remove the six 4mm screws located on the side and bottom of the camera casing using a Phillips #000 screwdriver.

Remove the six 4mm screws located on the side and bottom of the camera casing using a Phillips #000 screwdriver.

1024

Step 2

• Use a plastic opening tool to carefully separate the back casing from the main body of the camera. It’s advised to run along the entire “seam” of the casing and the camera with the tool to ensure full separation.

Use a plastic opening tool to carefully separate the back casing from the main body of the camera. It’s advised to run along the entire “seam” of the casing and the camera with the tool to ensure full separation.

Step 3

• Gently pry apart the back casing from the body of the camera. It’s recommended to apply as minimal force as is necessary to prevent unintended damage to the camera or the casing.

Gently pry apart the back casing from the body of the camera. It’s recommended to apply as minimal force as is necessary to prevent unintended damage to the camera or the casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    John Schug                     

Member since: 02/04/2020

97 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UW Stout, Team S1-G2, Schneider-Bateman Spring 2020                        

                                                  Member of UW Stout, Team S1-G2, Schneider-Bateman Spring 2020 



                    UWSTOUT-SCHNEIDER-BATEMAN-S20S1G2                     


                                            4 Members                     


                                            10 Guides authored