Difficulty
Easy
Steps
5
Time Required
10 - 20 minutes
Sections
1
- LCD Assembly
- 5 steps
Flags
0
BackPanasonic Lumix DMC-ZS6
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD Assembly
- Remove the battery and SD card.
Remove the battery and SD card.
1024
Step 2
- Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver.
- Unscrew the two 1.0 mm screws to the left with a Phillips #000 screwdriver.
- Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver.
Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver.
Unscrew the two 1.0 mm screws to the left with a Phillips #000 screwdriver.
Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver.
Step 3
- Separate the back of the camera from the main body carefully.
- Do not apply excessive force. The LCD is connected by ribbon cables that can be easily damaged.
Separate the back of the camera from the main body carefully.
Do not apply excessive force. The LCD is connected by ribbon cables that can be easily damaged.
Step 4
- Use the tip of the spudger to flip up the black tabs on the ribbon cables.
- Pull gently on the ribbon cables to unseat them.
Use the tip of the spudger to flip up the black tabs on the ribbon cables.
Pull gently on the ribbon cables to unseat them.
Step 5
- Use the tip of the spudger to flip up the metal tabs.
- Lift the LCD panel out of place carefully.
Use the tip of the spudger to flip up the metal tabs.
Lift the LCD panel out of place carefully.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Derrick Thompson
Member since: 01/30/2018
1,035 Reputation
5 Guides authored
Badges:
4
+1 more badge
Team
Baylor, Team S2-G5, Johnson Spring 2018
Member of Baylor, Team S2-G5, Johnson Spring 2018
BU-JOHNSON-S18S2G5
3 Members
10 Guides authored