Difficulty

Moderate

Steps

5

Time Required

                          10 - 15 minutes

Sections

1

  • Lens
  • 5 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackPanasonic Lumix DMC-ZS8

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lens
  • Take a Phillips Head screwdriver and remove the 2mm screws on the left and right side of the camera.

Take a Phillips Head screwdriver and remove the 2mm screws on the left and right side of the camera.

1024

Step 2

  • Remove the 3 Phillips 4mm screws located on the aluminum plating inside the camera.
  • Then remove the 3 Phillips 2mm screws located in the middle of the aluminum plating.

Remove the 3 Phillips 4mm screws located on the aluminum plating inside the camera.

Then remove the 3 Phillips 2mm screws located in the middle of the aluminum plating.

Step 3

  • Lay the camera on the front side where the aluminum panel is facing up.
  • Once the camera is in the right position, lift up the aluminum plating.

Lay the camera on the front side where the aluminum panel is facing up.

Once the camera is in the right position, lift up the aluminum plating.

Step 4

  • Stand the camera up in the upright position.
  • Unplug both copper wiring plugs from the motherboard.

Stand the camera up in the upright position.

Unplug both copper wiring plugs from the motherboard.

Step 5

  • Lift your camera into the upright position
  • The camera lens should slide out. (Pry it out with a spudger or a plastic opening tool if needed)

Lift your camera into the upright position

The camera lens should slide out. (Pry it out with a spudger or a plastic opening tool if needed)

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Elijah Painter

Member since: 03/03/2015

153 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Sam Houston State, Team 13-13, Blackburne Spring 2015                        

                                                  Member of Sam Houston State, Team 13-13, Blackburne Spring 2015 



                    SHSU-BLACKBURNE-S15S13G13                     


                                            4 Members                     


                                            10 Guides authored