Difficulty
Easy
Steps
4
Time Required
15 - 20 minutes
Sections
1
- Mounting Bracket
- 4 steps
Flags
0
BackPanasonic Lumix DMC-ZS8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Mounting Bracket
- Remove the side panels by unscrewing the Phillips head screws on both sides of the camera.
Remove the side panels by unscrewing the Phillips head screws on both sides of the camera.
1024
Step 2
- Remove the back panel by unscrewing the two Phillips head screws on the bottom of the camera towards the back.
- Lift the back panel from the camera and set it aside.
Remove the back panel by unscrewing the two Phillips head screws on the bottom of the camera towards the back.
Lift the back panel from the camera and set it aside.
Step 3
- Unscrew the Phillips head screw shown in the picture to remove the front panel.
- Remove the front panel to expose the bracket at the bottom of the camera.
Unscrew the Phillips head screw shown in the picture to remove the front panel.
Remove the front panel to expose the bracket at the bottom of the camera.
Step 4
- Pry the right side of the bracket up to allow you to grab the bracket with tweezers.
- Grab the bracket with tweezers and slide it toward the battery door to remove it from the frame of the camera.
Pry the right side of the bracket up to allow you to grab the bracket with tweezers.
Grab the bracket with tweezers and slide it toward the battery door to remove it from the frame of the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Trevor Meyers
Member since: 03/03/2015
356 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
Sam Houston State, Team 13-13, Blackburne Spring 2015
Member of Sam Houston State, Team 13-13, Blackburne Spring 2015
SHSU-BLACKBURNE-S15S13G13
4 Members
10 Guides authored