Difficulty

Moderate

Steps

12

Time Required

                          10 - 20 minutes

Sections

3

  • Battery
  • 4 steps
  • LCD Screen
  • 4 steps
  • Lens Assembly
  • 4 steps

Flags

4

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Missed a Step

Oops! This guide is currently missing some important steps.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackPanasonic Lumix ZS50

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Turn the camera off and identify the battery door located on the bottom of the camera.

Turn the camera off and identify the battery door located on the bottom of the camera.

1024

Step 2

  • Slide the “open” latch to the left: the battery door should spring open.
  • If your battery door doesn’t open you may have to pry it open using a plastic opening tool or a standard spudger.

Slide the “open” latch to the left: the battery door should spring open.

If your battery door doesn’t open you may have to pry it open using a plastic opening tool or a standard spudger.

Step 3

  • To release the battery, slide the white release lever next to the SD card slot.
  • If you find the battery release lever to be jammed you can push it using a plastic opening tool or standard spudger.

To release the battery, slide the white release lever next to the SD card slot.

If you find the battery release lever to be jammed you can push it using a plastic opening tool or standard spudger.

Step 4

  • The battery should now be released; you may now remove the battery from the camera body.

The battery should now be released; you may now remove the battery from the camera body.

Step 5

              LCD Screen
  • Orient the camera so the bottom is facing up and the battery door is on the right side.
  • Remove four black screws from the bottom of the camera.
  • Remove two black screws from the right side of the camera.
  • Remove one black screw from the left side of the camera.

Orient the camera so the bottom is facing up and the battery door is on the right side.

Remove four black screws from the bottom of the camera.

Remove two black screws from the right side of the camera.

Remove one black screw from the left side of the camera.

Step 6

  • Remove the casing from the camera by hand or using a plastic opening tool.

Remove the casing from the camera by hand or using a plastic opening tool.

Step 7

  • Use a spudger to lift up and tug off the green button board.
  • Be careful to not damage the attached ribbon cable.

Use a spudger to lift up and tug off the green button board.

Be careful to not damage the attached ribbon cable.

Step 8

  • Remove the screen using the plastic opening tool, prying from the top.
  • Once it’s lifted up, tug lightly on the large ribbon cable to detach the screen from the camera body.

Remove the screen using the plastic opening tool, prying from the top.

Once it’s lifted up, tug lightly on the large ribbon cable to detach the screen from the camera body.

Step 9

              Lens Assembly
  • Remove the three screws from the center of the copper plate.
  • Remove the four screws from the outer edges of the copper plate.
  • Use a plastic or metal spudger to pry the copper plate out of place.

Remove the three screws from the center of the copper plate.

Remove the four screws from the outer edges of the copper plate.

Use a plastic or metal spudger to pry the copper plate out of place.

Step 10

  • Remove the casing from the circuitboard by hand.
  • Remove the HDMI port casing by hand.

Remove the casing from the circuitboard by hand.

Remove the HDMI port casing by hand.

Step 11

  • Disconnect all orange ribbon cables connecting to the circuitboard by hand.
  • Disconnect the circuitboard by hand.
  • There will be one orange ribbon cable attached to the top that can now be removed.

Disconnect all orange ribbon cables connecting to the circuitboard by hand.

Disconnect the circuitboard by hand.

There will be one orange ribbon cable attached to the top that can now be removed.

Step 12

  • Remove the seven screws surrounding the lens assembly.
  • Move all ribbon cables out of your way while unscrewing.
  • Remove the three springs surrounding the lens.
  • Apply pressure on the front of the lens to push the lens out.

Remove the seven screws surrounding the lens assembly.

Move all ribbon cables out of your way while unscrewing.

Remove the three springs surrounding the lens.

Apply pressure on the front of the lens to push the lens out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Bridget Lathrop

Member since: 02/01/2017

140 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Baylor, Team 8-5, Whitney Spring 2017                        

                                                  Member of Baylor, Team 8-5, Whitney Spring 2017 



                    BU-WHITNEY-S17S8G5                     


                                            3 Members                     


                                            4 Guides authored