Panasonic Power Supply Board Power Board Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          1 minute            

Sections

5

• Disk Tray Cover
• 2 steps
• Outer Case
• 2 steps
• Front Panel
• 1 step
• Disk Drive
• 3 steps
• Power Board
• 1 step

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

• BackPanasonic DVD Player

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disk Tray Cover               

• Eject the disk tray from the DVD player before removing power supply.

Eject the disk tray from the DVD player before removing power supply.

1024

Step 2

• Evenly lift upward on the disk tray front cover (not slanted, as pictured). This will allow for easier disassembly of the player.

Evenly lift upward on the disk tray front cover (not slanted, as pictured). This will allow for easier disassembly of the player.

Step 3

              Outer Case               

• Remove the three screws running along the back edge of case cover.
• Remove the two screws from each side of the case cover.

Remove the three screws running along the back edge of case cover.

Remove the two screws from each side of the case cover.

Step 4

• Grab edges of the cover with your hands. Pull outward slightly, then straight up.

Grab edges of the cover with your hands. Pull outward slightly, then straight up.

Step 5

              Front Panel               

• Lift up the five tabs securing the front panel to the chassis. There are three on the bottom, and two on the inside edges of the panel. Panel should then lift off the player.

Lift up the five tabs securing the front panel to the chassis. There are three on the bottom, and two on the inside edges of the panel. Panel should then lift off the player.

Step 6

              Disk Drive               

• Locate the four screws securing the disk drive assembly. There are two on each side.
• Use a narrow screwdriver to remove all four screws.
• Remove the blue ribbon wire from its connector. When doing this, be cautious to not damage the connector.

Locate the four screws securing the disk drive assembly. There are two on each side.

Use a narrow screwdriver to remove all four screws.

Remove the blue ribbon wire from its connector. When doing this, be cautious to not damage the connector.

Step 7

• Lift assembly by the front to pull metal bracket from the power board.
• Pull up back end and lift drive out.

Lift assembly by the front to pull metal bracket from the power board.

Pull up back end and lift drive out.

Step 8

• With the drive assembly separate from the player, hold as shown and pull the bracket edges away from the disk drive.
• Lift bracket off and reserve for re-assembly.

With the drive assembly separate from the player, hold as shown and pull the bracket edges away from the disk drive.

Lift bracket off and reserve for re-assembly.

Step 9

              Power Board               

• Remove 4 screws from the power board as shown.
• Lift the power board straight up and out of the chassis.

Remove 4 screws from the power board as shown.

Lift the power board straight up and out of the chassis.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 7 other contributors 

                    Kevin                     

Member since: 04/26/2011

354 Reputation

                                      8 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 18-20, Garner Spring 2011                        

                                                  Member of Cal Poly, Team 18-20, Garner Spring 2011 



                    CPSU-GARNER-S11S18G20                     


                                            4 Members                     


                                            11 Guides authored