Difficulty
Moderate
Steps
3
Time Required
15 - 20 minutes
Sections
1
- Band on Three Digit Counter
- 3 steps
Flags
2
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackPanasonic RQ-2102
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Band on Three Digit Counter
- Remove the three screws from the back of the device body.
- Remove both of the screws from the battery compartment.
- Remove the back of the device.
- Make sure not to pull apart the cords that hold the device together.
Remove the three screws from the back of the device body.
Remove both of the screws from the battery compartment.
Remove the back of the device.
Make sure not to pull apart the cords that hold the device together.
1024
Step 2
- Carefully remove the band from the gear spindle.
- Dispose of the old, broken band.
Carefully remove the band from the gear spindle.
Dispose of the old, broken band.
Step 3
- Insert the new band into the gear spindle.
- Twist the black spindle to make sure the counter works.
- If the counter does not work, ensure the band is not broken due to installation.
Insert the new band into the gear spindle.
Twist the black spindle to make sure the counter works.
If the counter does not work, ensure the band is not broken due to installation.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Dmitriy Borisyuk
Member since: 04/07/2015
237 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
Eastern Washington University, Team 1-6, Plummer Spring 2015
Member of Eastern Washington University, Team 1-6, Plummer Spring 2015
EWU-PLUMMER-S15S1G6
4 Members
5 Guides authored
