Difficulty

Moderate

Steps

11

Time Required

Suggest a time??

Sections

3

  • Battery
  • 2 steps
  • Back Cover
  • 6 steps
  • Speaker
  • 3 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackPanasonic Toughbook CF-29

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Locate the bay door for the battery on the left side of the laptop.

Locate the bay door for the battery on the left side of the laptop.

1024

Step 2

  • Slide the latch to the right and then down to unlock it.
  • Pull out the battery.

Slide the latch to the right and then down to unlock it.

Pull out the battery.

Step 3

              Back Cover
  • Begin by turning the laptop upside down with the handle towards you.
  • Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.

Begin by turning the laptop upside down with the handle towards you.

Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.

Step 4

  • Remove the panel and set it aside.
  • Use a Phillips size 0 screwdriver to remove these 8 small screws.

Remove the panel and set it aside.

Use a Phillips size 0 screwdriver to remove these 8 small screws.

Step 5

  • Use a Phillips size 1 screwdriver to remove the remaining 8 screws.

Use a Phillips size 1 screwdriver to remove the remaining 8 screws.

Step 6

  • Use a plastic opening tool to release, but NOT remove, the back cover because it is sealed with adhesive.

Use a plastic opening tool to release, but NOT remove, the back cover because it is sealed with adhesive.

Step 7

  • Be careful when lifting the cover as you may damage some connections.
  • Slowly lift the cover so that you can disconnect the red and white wires connecting the speaker to the sound card.

Be careful when lifting the cover as you may damage some connections.

Slowly lift the cover so that you can disconnect the red and white wires connecting the speaker to the sound card.

Step 8

  • Now the back cover should be off and you can access the inside of the casing.

Now the back cover should be off and you can access the inside of the casing.

Step 9

              Speaker
  • Place the back cover infront of you so you can access the inside of it.
  • Remove the 3 screws holding in the speaker.

Place the back cover infront of you so you can access the inside of it.

Remove the 3 screws holding in the speaker.

Step 10

  • Pry out the speaker using a flat screw driver or a blue pry tool. It is held in with an adhesive.

Pry out the speaker using a flat screw driver or a blue pry tool. It is held in with an adhesive.

Step 11

  • Your speaker is now removed
  • Put in your replacement by following the reverse steps.

Your speaker is now removed

Put in your replacement by following the reverse steps.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Rohun Heesen

Member since: 04/13/2010

387 Reputation

                                      2 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       Cal Poly, Team 27-93, Amido Spring 2010                        

                                                  Member of Cal Poly, Team 27-93, Amido Spring 2010 



                    CPSU-AMIDO-S10S27G93                     


                                            4 Members                     


                                            24 Guides authored