Panasonic Vdr D220 Dvd Camera Front Lens Element Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Camera lens
7 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackPanasonic VDR-D220 DVD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Camera lens

Remove one 5mm screw on the bottom side of the camera with a Phillips #0 screwdriver.

Remove one 5mm screw on the bottom side of the camera with a Phillips #0 screwdriver.

1024

Step 2

Open the side port door.

Open the side port door.

Step 3

Remove one 5mm screw inside the side port with your Phillips #0 screwdriver.

Remove one 5mm screw inside the side port with your Phillips #0 screwdriver.

Step 4

Using a plastic spudger, pry to disconnect the top-front part of the camera.
Slide the top portion of the camera forward revealing a ribbon cable.

Using a plastic spudger, pry to disconnect the top-front part of the camera.

Slide the top portion of the camera forward revealing a ribbon cable.

Step 5

Flip the camera on the right side.
Gently pull the front part from the main body to reveal the cables connecting them.
Do not pull too hard because of the ZIF connector cable.
Use your plastic opening tool to disconnect the connection point safely.
Press the tab with a plastic opening tool and then pull the ZIF connector to detach.

Flip the camera on the right side.

Gently pull the front part from the main body to reveal the cables connecting them.

Do not pull too hard because of the ZIF connector cable.

Use your plastic opening tool to disconnect the connection point safely.

Press the tab with a plastic opening tool and then pull the ZIF connector to detach.

Step 6

Look at the camera from the front side.
Remove four 5mm screws using a Phillips #0 screwdriver.
There are two 5mm screws on each side of the lens, for a total of four screws.

Look at the camera from the front side.

Remove four 5mm screws using a Phillips #0 screwdriver.

There are two 5mm screws on each side of the lens, for a total of four screws.

Step 7

Pull the front element lens gently away from the camera.
In some cases the lens need not be replaced completely. Sometimes cleaning the lens with a microfiber cloth and isopropyl alcohol will alleviate blurry video issues.

Pull the front element lens gently away from the camera.

In some cases the lens need not be replaced completely. Sometimes cleaning the lens with a microfiber cloth and isopropyl alcohol will alleviate blurry video issues.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Brandon Gregoire

Member since: 09/18/2019

1,313 Reputation

                                      6 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Embry-Riddle Aeronautical University, Team S1-G3, Watkins Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S1-G3, Watkins Fall 2019 



                    ERAU-WATKINS-F19S1G3                     


                                            4 Members                     


                                            14 Guides authored

Better Introduction#

Introduction#

What you need#

Team#

Better Introduction

Introduction

What you need

Team