Difficulty
Easy
Steps
3
Time Required
10 minutes
Sections
1
- Disk Latch
- 3 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackPanasonic VDR-D220 DVD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Disk Latch
- The DVD’s door can be opened by pressing the top-left of the DVD’s door.
- If this doesn’t work, you may need to manually eject.
- Use the plastic spudger with light force to carefully pry open the door.
- Open the disk ejection slot gently.
The DVD’s door can be opened by pressing the top-left of the DVD’s door.
If this doesn’t work, you may need to manually eject.
Use the plastic spudger with light force to carefully pry open the door.
Open the disk ejection slot gently.
1024
Step 2
- Remove the two 5mm screws on the top-right corner of the disk slot using Phillips #0 screwdriver.
Remove the two 5mm screws on the top-right corner of the disk slot using Phillips #0 screwdriver.
Step 3
- Carefully remove the chip.
- The disk is completely replaced/removed.
Carefully remove the chip.
The disk is completely replaced/removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Tianyi Luo
Member since: 09/22/2019
97 Reputation
1 Guide authored
Badges:
2
Team
Embry-Riddle Aeronautical University, Team S1-G3, Watkins Fall 2019
Member of Embry-Riddle Aeronautical University, Team S1-G3, Watkins Fall 2019
ERAU-WATKINS-F19S1G3
4 Members
14 Guides authored
