Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
1
- SD Card
- 5 steps
Flags
0
BackPandigital Novel PRD07T10WWH7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
SD Card
- Remove the two white panels on the back of the device, starting with the bottom one by pushing in and down.
- Then, to remove the top white piece, use the plastic opening tool to start in the middle and remove the clips, working your way around.
Remove the two white panels on the back of the device, starting with the bottom one by pushing in and down.
Then, to remove the top white piece, use the plastic opening tool to start in the middle and remove the clips, working your way around.
1024
Step 2
- Using a Phillips #0 bit, remove the 12 4mm screws.
Using a Phillips #0 bit, remove the 12 4mm screws.
Step 3
- Pry the gray piece off of the motherboard.
- Make sure the unplug the battery before you fully separate the gray piece.
Pry the gray piece off of the motherboard.
Make sure the unplug the battery before you fully separate the gray piece.
Step 4
- Push upwards on the SD card slot to release it.
Push upwards on the SD card slot to release it.
Step 5
- The SD card can now be removed safely.
The SD card can now be removed safely.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Carl Weber
Member since: 10/21/2016
316 Reputation
2 Guides authored
Badges:
16
+13 more badges
Team
UMass Dartmouth, Team 3-7, Isaacson Fall 2016
Member of UMass Dartmouth, Team 3-7, Isaacson Fall 2016
UMASSD-ISAACSON-F16S3G7
3 Members
10 Guides authored
