Difficulty
Moderate
Steps
5
Time Required
5 - 10 minutes
Sections
1
- Battery
- 5 steps
Flags
0
BackPandigital Super Nova
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the screw covers from each corner of the back side of the device.
- Set aside.
Remove the screw covers from each corner of the back side of the device.
Set aside.
1024
Step 2
- Using a Philips screwdriver, remove all four .15 mm screws from each corner.
- Set aside.
Using a Philips screwdriver, remove all four .15 mm screws from each corner.
Step 3
- Using the plastic opening tool, remove the back cover of the device.
Using the plastic opening tool, remove the back cover of the device.
Step 4
- Remove the three .11 mm screws that hold the battery in place.
- Set aside.
Remove the three .11 mm screws that hold the battery in place.
Step 5
- Unplug the battery and remove from device.
- Avoid touching the motherboard as it is fragile.
Unplug the battery and remove from device.
Avoid touching the motherboard as it is fragile.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
pfcprice
Member since: 10/10/2016
101 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Texas Tech, Team 1-2, Bennett Fall 2016
Member of Texas Tech, Team 1-2, Bennett Fall 2016
TTU-BENNETT-F16S1G2
4 Members
6 Guides authored
