Difficulty

Difficult

Steps

15

Time Required

                          5 minutes - 1 hour

Sections

3

  • Battery
  • 5 steps
  • Front Facing Camera
  • 2 steps
  • Screen
  • 8 steps

Flags

0

  • BackPandigital Super Nova

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the screw covers from each corner of the back side of the device.
  • Set aside.

Remove the screw covers from each corner of the back side of the device.

Set aside.

1024

Step 2

  • Using a Philips screwdriver, remove all four .15 mm screws from each corner.
  • Set aside.

Using a Philips screwdriver, remove all four .15 mm screws from each corner.

Step 3

  • Using the plastic opening tool, remove the back cover of the device.

Using the plastic opening tool, remove the back cover of the device.

Step 4

  • Remove the three .11 mm screws that hold the battery in place.
  • Set aside.

Remove the three .11 mm screws that hold the battery in place.

Step 5

  • Unplug the battery and remove from device.
  • Avoid touching the motherboard as it is fragile.

Unplug the battery and remove from device.

Avoid touching the motherboard as it is fragile.

Step 6

              Front Facing Camera
  • Use a metal pry tool to separate the camera and the small clip that holds it in place.
  • Do NOT touch the MotherBoard with your bare hands. There is risk of short circuiting the device. Use nitrile gloves to prevent this.

Use a metal pry tool to separate the camera and the small clip that holds it in place.

Do NOT touch the MotherBoard with your bare hands. There is risk of short circuiting the device. Use nitrile gloves to prevent this.

Step 7

  • Use a pair of small tweezers to gently pull the camera connector out of the motherboard.

Use a pair of small tweezers to gently pull the camera connector out of the motherboard.

Step 8

              Screen
  • Use a screwdriver to remove the six .15 mm screws that hold the motherboard in place. Set aside.

Use a screwdriver to remove the six .15 mm screws that hold the motherboard in place. Set aside.

Step 9

  • Remove the eleven screws that hold the screen to the base. Eight are .15 mm and three are .11 mm.

Remove the eleven screws that hold the screen to the base. Eight are .15 mm and three are .11 mm.

Step 10

  • Remove the motherboard from the tablet using a nylon spudger.
  • A regular black nylon spudger should be used to avoid damaging the motherboard.

Remove the motherboard from the tablet using a nylon spudger.

A regular black nylon spudger should be used to avoid damaging the motherboard.

Step 11

  • Use tweezers to carefully remove the connector between the screen to the tablet.

Use tweezers to carefully remove the connector between the screen to the tablet.

Step 12

  • Use a pry tool to carefully separate the motherboard from the hard casing.
  • Excessive force in this step can damage your device.

Use a pry tool to carefully separate the motherboard from the hard casing.

Excessive force in this step can damage your device.

Step 13

  • Lift the motherboard out of the tablet.
  • Remove the second connector between the screen and the motherboard.

Lift the motherboard out of the tablet.

Remove the second connector between the screen and the motherboard.

Step 14

  • Pry the silver screen box from away from the device.
  • Open each of the four clips securing the screen box to open it.

Pry the silver screen box from away from the device.

Open each of the four clips securing the screen box to open it.

Step 15

  • Lift the screen out of its protective box.
  • If the protective box is damaged, it will also need replacing.

Lift the screen out of its protective box.

If the protective box is damaged, it will also need replacing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    sterling hannsz

Member since: 10/10/2016

222 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Texas Tech, Team 1-2, Bennett Fall 2016                        

                                                  Member of Texas Tech, Team 1-2, Bennett Fall 2016 



                    TTU-BENNETT-F16S1G2                     


                                            4 Members                     


                                            6 Guides authored