Difficulty

Moderate

Steps

9

Time Required

                          10 - 15 minutes

Sections

3

  • Battery
  • 5 steps
  • SIM Card
  • 1 step
  • Speaker
  • 3 steps

Flags

0

  • BackPantech Matrix

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Phone Orientation
  • Place phone with screen side facing toward you.

Place phone with screen side facing toward you.

1024

Step 2

              Phone Orientation
  • Flip phone over so screen side is now facing down.

Flip phone over so screen side is now facing down.

Step 3

              Remove Back Cover
  • Gently slide the backside phone cover off exposing the battery underneath.

Gently slide the backside phone cover off exposing the battery underneath.

Step 4

              Lift Battery
  • Carefully lift the battery up from where the spudger is pointed.

Carefully lift the battery up from where the spudger is pointed.

Step 5

              Remove Battery
  • Remove the battery from its dock.

Remove the battery from its dock.

Step 6

              Slide SIM Card Out
  • Slide the SIM Card out of its dock.

Slide the SIM Card out of its dock.

Step 7

              Remove Phone Screws
  • Use a Phillips screwdriver to remove the four 2mm Phillips #000 screws from each corner of the device.

Use a Phillips screwdriver to remove the four 2mm Phillips #000 screws from each corner of the device.

Step 8

              Remove Phone Casing
  • Rotate the phone so the base is facing you.
  • Use spudger to separate phone casing and inside as shown.
  • Remove the casing carefully and set aside the rest of the phone.

Rotate the phone so the base is facing you.

Use spudger to separate phone casing and inside as shown.

Remove the casing carefully and set aside the rest of the phone.

Step 9

              Remove Phone Speaker
  • Place the spudger in the notch on the side of the speaker as shown.
  • Use the spudger to gently pry the speaker loose from its dock.
  • Remove the speaker fully from the phone.

Place the spudger in the notch on the side of the speaker as shown.

Use the spudger to gently pry the speaker loose from its dock.

Remove the speaker fully from the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Zeel Patel

Member since: 10/13/2014

1,078 Reputation

                                      9 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges