Paw Patrol Toy Garbage Truck Fixing Broken Solder Joint Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          15 minutes            

Sections

1

• Fixing Broken Solder Joint and Cable Routing
• 4 steps

Flags

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackPaw Patrol Toy Garbage Truck “Rocky”

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Fixing Broken Solder Joint and Cable Routing               

• This is the truck we are talking about. The Spin Master garbage truck of the dog Rocky from the TV series Paw Patrol

This is the truck we are talking about. The Spin Master garbage truck of the dog Rocky from the TV series Paw Patrol

1024

Step 2

• We need to remove seven PH#1 screws. I recommend a along screw driver without bit holder to do this.
• Two of the screws are hidden underneath the rear tires. You have to slide your screw driver behind the tire down to the screw hole. The tires are not removable.

We need to remove seven PH#1 screws. I recommend a along screw driver without bit holder to do this.

Two of the screws are hidden underneath the rear tires. You have to slide your screw driver behind the tire down to the screw hole. The tires are not removable.

Step 3

• You can now remove the bottom half from the top.
• Inside the truck you will find two LEDs for the lights.
• A speaker for the sound.
• A small PCB.
• Also there are the connections from your battery holder
• You can remove the orange fork to get a better view of the contacts.
• I had to reflow them with the soldering iron and bent them a little bit down to avoid further touching of the fork shaft

You can now remove the bottom half from the top.

Inside the truck you will find two LEDs for the lights.

A speaker for the sound.

A small PCB.

Also there are the connections from your battery holder

You can remove the orange fork to get a better view of the contacts.

I had to reflow them with the soldering iron and bent them a little bit down to avoid further touching of the fork shaft

Step 4

• Finally a tipp for the reassembly of the truck.
• If you had all screws falling out, you can slide the two blue trash cans down, to easily place the two hidden screws.
• Gratulations, you are done!

Finally a tipp for the reassembly of the truck.

If you had all screws falling out, you can slide the two blue trash cans down, to easily place the two hidden screws.

Gratulations, you are done!

Go the steps revers to reassemble the toy.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    TheLOD2010                     

Member since: 10/30/2015

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges