Difficulty

Moderate

Steps

5

Time Required

                          15 minutes

Sections

1

  • Trucks
  • 5 steps

Flags

0

  • BackSkateboard

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Trucks
  • Use a skate tool to loosen the bolt in the wheel with an appropriately sized socket.
  • A skate tool will come with all the tools necessary to do this replacement from start to finish.

Use a skate tool to loosen the bolt in the wheel with an appropriately sized socket.

A skate tool will come with all the tools necessary to do this replacement from start to finish.

1024

Step 2

  • Remove the wheel by lifting it from the truck.
  • Repeat this step for the other wheel.

Remove the wheel by lifting it from the truck.

Repeat this step for the other wheel.

Step 3

  • After completing the removal of both wheels, your board will look like this.
  • Place the skate tool over the bolt on the truck.
  • Maintain a good grip on the tool and use the Phillips screwdriver to loosen the nuts.
  • Repeat this step for all four screws.

After completing the removal of both wheels, your board will look like this.

Place the skate tool over the bolt on the truck.

Maintain a good grip on the tool and use the Phillips screwdriver to loosen the nuts.

Repeat this step for all four screws.

Step 4

  • Lift the truck to remove it.

Lift the truck to remove it.

Step 5

  • Remove the screws from the board by pulling them out with your hands.
  • Use the Phillips screwdriver to loosen them more, if necessary.

Remove the screws from the board by pulling them out with your hands.

Use the Phillips screwdriver to loosen them more, if necessary.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Eduardo Ron

Member since: 02/17/2021

171 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Texas Tech, Team S3-G9, Cowan Spring 2021                        

                                                  Member of Texas Tech, Team S3-G9, Cowan Spring 2021 



                    TTU-COWAN-S21S3G9                     


                                            1 Member                     


                                            1 Guide authored