Difficulty

Easy

Steps

8

Time Required

                          10 - 20 minutes

Sections

1

  • Internal memory battery
  • 8 steps

Flags

4

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackPENTAX OPTIO 330

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Remove rear bloc
  • remove the two 2.5mm screw of the left side

remove the two 2.5mm screw of the left side

1024

Step 2

              Remove rear bloc
  • Remove two 4mm screw of the right side

Remove two 4mm screw of the right side

Step 3

              Remove rear bloc
  • remove 2mm screw
  • remove 3mm screw
  • remove the three 3.5mm screw

remove 2mm screw

remove 3mm screw

remove the three 3.5mm screw

Step 4

              Remove rear cover
  • Open the memory protection
  • Remove gently the rear cover
  • When re-assembly take care to the thin tabs

Open the memory protection

Remove gently the rear cover

When re-assembly take care to the thin tabs

Step 5

              Remove rear cover
  • this part can fall down. So rome it before next step.

this part can fall down. So rome it before next step.

Step 6

              Front cover remove
  • Insérez ici votre traduction

Insérez ici votre traduction

Step 7

  • Remove four screw
  • unplug the two Flex

Remove four screw

unplug the two Flex

Step 8

              Battery replacement
  • This connector is directly to the board
  • This Flex connector need to be unplug
  • The 321 battery is there
  • You can add some thermal glue to fix the battery
  • I did it with a small piece of scotch

This connector is directly to the board

This Flex connector need to be unplug

The 321 battery is there

You can add some thermal glue to fix the battery

I did it with a small piece of scotch

To re-assembly your device follow the step backward

Cancel: I did not complete this guide.

        Bertrand PIGEARD is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Bertrand PIGEARD

Author

                                      with 1 other contributor 


                    Bertrand PIGEARD

Member since: 12/11/2021

235 Reputation

                                      1 Guide authored                  



                       Badges:
                       3