Featured

Featured Guide

Difficulty

Moderate

Steps

5

Time Required

                          7 minutes

Sections

1

  • Front and Back Cover
  • 5 steps

Flags

This guide has been found to be exceptionally cool by the iFixit staff.

  • BackPentax Optio S4i

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front and Back Cover
  • Remove the following screws:
  • Two silver 3.15mm Phillips #00 screws on the right side of the camera
  • Two silver 2.08mm Phillips #00 screws on the left side of the camera

Remove the following screws:

Two silver 3.15mm Phillips #00 screws on the right side of the camera

Two silver 2.08mm Phillips #00 screws on the left side of the camera

1024

Step 2

  • Remove the two indicated screws on the bottom of the camera:
  • The screw circled in red is a longer silver 3.15mm Phillips #00 screw
  • The screw circled in blue is a shorter silver 2.25mm Phillips #00 screw

Remove the two indicated screws on the bottom of the camera:

The screw circled in red is a longer silver 3.15mm Phillips #00 screw

The screw circled in blue is a shorter silver 2.25mm Phillips #00 screw

Step 3

  • Carefully pull the back of casing away from the front.

Carefully pull the back of casing away from the front.

Step 4

  • After removing the back cover, several things must be removed.
  • Silver donut-shaped button will fall off. Place separately. Remove the plug covers on the right side of camera, labeled “PC/AV” and “DC IN 4.5V”.

After removing the back cover, several things must be removed.

Silver donut-shaped button will fall off. Place separately. Remove the plug covers on the right side of camera, labeled “PC/AV” and “DC IN 4.5V”.

Step 5

  • To remove the front cover, gently hold the inside structure of the camera and slowly pull the front cover off.

To remove the front cover, gently hold the inside structure of the camera and slowly pull the front cover off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Nicole Wong

Member since: 01/30/2011

329 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 4-29, Regan Winter 2011                        

                                                  Member of Cal Poly, Team 4-29, Regan Winter 2011 



                    CPSU-REGAN-W11S4G29                     


                                            3 Members                     


                                            10 Guides authored