Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Shutter and Power Button
- 4 steps
Flags
2
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
Better Introduction
Improve this guide by completing or revising its introduction.
BackPentax Optio WG-3 GPS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Shutter and Power Button
- Peel the lining back on the top of the camera.
- The lining is glued down to the device, you will have to peel the lining back using tweezers. After you are finished with your work you will have to use glue or adhesive to re-stick the lining back to the device.
Peel the lining back on the top of the camera.
The lining is glued down to the device, you will have to peel the lining back using tweezers. After you are finished with your work you will have to use glue or adhesive to re-stick the lining back to the device.
1024
Step 2
- Using tweezers pull straight up to remove the 2 rubber button toppers
Using tweezers pull straight up to remove the 2 rubber button toppers
Step 3
- Remove the 3, 2 mm screws under the rubber buttons.
Remove the 3, 2 mm screws under the rubber buttons.
Step 4
- Replace the shutter/power button or button component.
Replace the shutter/power button or button component.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Allison Merdian
Member since: 03/05/2015
422 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
Sam Houston State, Team 11-4, Blackburne Winter 2015
Member of Sam Houston State, Team 11-4, Blackburne Winter 2015
SHSU-BLACKBURNE-W15S11G4
2 Members
8 Guides authored