Difficulty

Moderate

Steps

8

Time Required

                          5 - 10 minutes

Sections

2

  • Top Cover
  • 5 steps
  • Button
  • 3 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackPentax PZ-10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Cover
  • The top cover is one piece encasing the top of the device except the shutter release button and flash.

The top cover is one piece encasing the top of the device except the shutter release button and flash.

1024

Step 2

              Removing Upper Right Housing Screw
  • With the camera lens face down, locate the screw under the overhanging piece of the top casing on the right side of the back panel.
  • Using the J0 screwdriver, remove the 6.3 mm screw.

With the camera lens face down, locate the screw under the overhanging piece of the top casing on the right side of the back panel.

Using the J0 screwdriver, remove the 6.3 mm screw.

Step 3

              Removing Screw in Battery Compartment
  • Locate the next screw by holding the camera upside down with the battery compartment empty and face up.
  • Remove the 6.3 mm screw using a J0 screwdriver.

Locate the next screw by holding the camera upside down with the battery compartment empty and face up.

Remove the 6.3 mm screw using a J0 screwdriver.

Step 4

              Removing Screw Under Flash Bulb
  • The next screw is found in the overhanging piece just above the lens.
  • With the top of the camera facing down, remove the 3.4 mm screw with a J0 screwdriver.

The next screw is found in the overhanging piece just above the lens.

With the top of the camera facing down, remove the 3.4 mm screw with a J0 screwdriver.

Step 5

              Pulling Off the Top Cover
  • Gently pull off the top cover with your hands by pulling on the tab on the left of the camera.

Gently pull off the top cover with your hands by pulling on the tab on the left of the camera.

Step 6

              Locate Rubber Tabs
  • Gently remove the beige rubber tabs from under the casing by pulling each down using tweezers.

Gently remove the beige rubber tabs from under the casing by pulling each down using tweezers.

Step 7

  • Remove the 3 buttons by pushing them from under the casing out through the top.
  • Each button is slotted differently, so pay attention to the orientation of each piece.

Remove the 3 buttons by pushing them from under the casing out through the top.

Each button is slotted differently, so pay attention to the orientation of each piece.

Step 8

              Buttons
  • The buttons are now free to be replaced or cleaned.

The buttons are now free to be replaced or cleaned.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Jonathan Diaz

Member since: 04/20/2015

213 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges