Difficulty

Moderate

Steps

5

Time Required

                          10 minutes

Sections

1

  • Battery
  • 5 steps

Flags

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackPetnet SmartFeeder SF10E

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Eject the SmartBowl by pressing the button located at the front of the SmartFeeder base.
  • Remove the metal tray by using both hands and pulling out the bowl towards you.

Eject the SmartBowl by pressing the button located at the front of the SmartFeeder base.

Remove the metal tray by using both hands and pulling out the bowl towards you.

1024

Step 2

  • Turn the bowl tray side down by using both hands.
  • Remove seven 11 mm screws by using the Phillips #1 screwdriver.

Turn the bowl tray side down by using both hands.

Remove seven 11 mm screws by using the Phillips #1 screwdriver.

Step 3

  • Take the battery out of the SmartBowl with tweezers, avoid pulling on any wires.
  • Hold the SmartBowl down using one hand while using the other hand to remove the battery.

Take the battery out of the SmartBowl with tweezers, avoid pulling on any wires.

Hold the SmartBowl down using one hand while using the other hand to remove the battery.

Step 4

  • Remove the tape, closest to the four white connectors, with your hands.
  • Keep the wires attached to the tape for easy reassembly.

Remove the tape, closest to the four white connectors, with your hands.

Keep the wires attached to the tape for easy reassembly.

Step 5

  • Trace the wires with your hands from the battery to the motherboard.
  • Detach the three-prong connector between the battery and the motherboard by pulling the white connectors with your hands.
  • Hold on to the sockets on the motherboard or you could accidentally pull off the entire assembly.

Trace the wires with your hands from the battery to the motherboard.

Detach the three-prong connector between the battery and the motherboard by pulling the white connectors with your hands.

Hold on to the sockets on the motherboard or you could accidentally pull off the entire assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Kristin Villanueva

Member since: 10/08/2018

370 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team S13-G7, White Fall 2018                        

                                                  Member of Cal Poly, Team S13-G7, White Fall 2018 



                    CPSU-WHITE-F18S13G7                     


                                            4 Members                     


                                            5 Guides authored