Petzl E03 050 Headlamp Mount Assembly Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          2 - 3 minutes            

Sections

1

• Mount Assembly
• 6 steps

Flags

0

• BackPetzl E03 050 Headlamp

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Examine the Mount Assembly               

• Check the mount assembly for a loose or missing nut and/or bolt.

Check the mount assembly for a loose or missing nut and/or bolt.

1024

Step 2

              Remove the Old Nut & Bolt               

• Remove the old nut and bolt by using a Phillips head screwdriver to rotate the bolt counterclockwise until it becomes free. The nut should become free on its own as the bolt is removed. If it doesn’t, poke the nut out using the screwdriver.

Remove the old nut and bolt by using a Phillips head screwdriver to rotate the bolt counterclockwise until it becomes free. The nut should become free on its own as the bolt is removed. If it doesn’t, poke the nut out using the screwdriver.

Step 3

              Insert New Nut               

• Insert the new nut by placing it in the left side of the circular hole created after the removal of the old nut & bolt in step 2.

Insert the new nut by placing it in the left side of the circular hole created after the removal of the old nut & bolt in step 2.

Step 4

              Insert the New Bolt               

• Insert the threaded portion of the new bolt with the washer into the right side of the circular hole created by the removal of the old nut & bolt in step #2.

Insert the threaded portion of the new bolt with the washer into the right side of the circular hole created by the removal of the old nut & bolt in step #2.

Step 5

              Hold the Nut               

• Firmly hold the nut in place with your left thumb such that the nut will not rotate.

Firmly hold the nut in place with your left thumb such that the nut will not rotate.

Step 6

              Tighten the Bolt               

• Tighten the new bolt into the new nut by turning the bolt clockwise using a Phillips head screwdriver until the bolt & nut are tight.

Tighten the new bolt into the new nut by turning the bolt clockwise using a Phillips head screwdriver until the bolt & nut are tight.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Mike                     

Member since: 10/23/2014

331 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Baylor, Team 8-10, Williams Fall 2014                        

                                                  Member of Baylor, Team 8-10, Williams Fall 2014 



                    BU-WILLIAMS-F14S8G10                     


                                            3 Members                     


                                            5 Guides authored