Philips Android TV 48pfs8159 only shows the Philips logo and starts again.
You can fix the error by downloading the latest tv update from Philips and extracting the file onto a USB stick. Important: Extract the file into the root folder of the usb stick. Do not create an “upgrade” folder (this is how it is in the Philips instructions downloaded with the update, but this is wrong to fix the error. Only the update file on the stick must be without a folder. Connect the USB stick to the TV. Remove the power. Simultaneously press on the joystick at the bottom right of the TV and pull down and hold it in such a way that the power is plugged in again (it may be necessary for two people). Hold the joystick as long as the tv turns on is displayed and “No command” is displayed android is in recovery mode. Now select “delete cache” via the remote control and confirm with ok on the remote control. Then select “reset factory defaults”. Select “install software update” as the last step from external storage “. The update file from the usb stick should now be displayed. Select, print ok and the entire operating system will be reinstalled longer) in the “reboot” menu. The TV reboots and will work normally again. Now all settings have to be made again but the TV is alive again.
