Difficulty
Moderate
Steps
3
Time Required
45 minutes
Sections
1
- Power board repair
- 3 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackPhilips Fritteuse Friteuse Airfryer Rapid Air Technology HD 9240
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power board repair
- Open the device: Unscrew the 4 Torx screws (use a long-necked screwdriver)
Open the device: Unscrew the 4 Torx screws (use a long-necked screwdriver)
1024
Step 2
- Desolder marked components.
- Solder spare parts:
- C6: 10uF/50V, low ESR (short circuit)
- PWM controller
- Fuse resistors R1 and R12: 47 ohms, 2W (blown)
Desolder marked components.
Solder spare parts:
C6: 10uF/50V, low ESR (short circuit)
PWM controller
Fuse resistors R1 and R12: 47 ohms, 2W (blown)
Step 3
- Put the device back together and test it ;)
Put the device back together and test it ;)
- Heating wire: 25.6 Ohm measured —> intactNTC resistance: 123 kOhm measured (@20°C) —> intact230V measured at the connection on the board —> thermal fuses (SF1888RJ) intact
*
Credits: https://www.microcontroller.net/topic/46…
Cancel: I did not complete this guide.
2 other people completed this guide.
oldturkey03 is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
oldturkey03
Author
with 1 other contributor
Thomas Zurbrügg
Member since: 03/29/2021
311 Reputation
2 Guides authored
Badges:
6
+3 more badges