Philips Dvp5992 F7 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes

Sections

Screen
4 steps

Flags

BackPhilips DVP5992-F7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Screen

Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.
Remove the 6.4 mm Phillips #1 screws on each side of the device.

Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.

Remove the 6.4 mm Phillips #1 screws on each side of the device.

1024

Step 2

Remove the top plate of the DVD by firmly grasping the player on both sides.
Shift the top plate towards the backside of the player.
Lift the back half of the top plate up to remove it from the player.

Remove the top plate of the DVD by firmly grasping the player on both sides.

Shift the top plate towards the backside of the player.

Lift the back half of the top plate up to remove it from the player.

Step 3

Unplug the bundled cable connector that attaches the screen to the motherboard.
Remove the 3.175 mm Phillips #1 screw that connects the screen’s ground wire to the shell of the DVD player.
Remove the three 6.35 mm Phillips #1 screws that attach the screen to the front cover of the DVD player.

Unplug the bundled cable connector that attaches the screen to the motherboard.

Remove the 3.175 mm Phillips #1 screw that connects the screen’s ground wire to the shell of the DVD player.

Remove the three 6.35 mm Phillips #1 screws that attach the screen to the front cover of the DVD player.

Step 4

Slowly pull the screen backwards starting with the side farthest from the disc tray.
Unplug the bundled cable connector that is located close to the disc tray as you pull the screen out of the DVD player.

Slowly pull the screen backwards starting with the side farthest from the disc tray.

Unplug the bundled cable connector that is located close to the disc tray as you pull the screen out of the DVD player.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Hunter McCraw

Member since: 08/31/2018

177 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Western Carolina University, Team S1-G6, Virtue Fall 2018                        

                                                  Member of Western Carolina University, Team S1-G6, Virtue Fall 2018 



                    WCU-VIRTUE-F18S1G6                     


                                            3 Members                     


                                            9 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team