Difficulty

Moderate

Steps

9

Time Required

                          25 minutes

Sections

1

  • Tray
  • 9 steps

Flags

0

  • BackPhilips DVP5992-F7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Tray
  • Plug in the DVD player.
  • Press the eject button to open the tray.
  • Push up on the tray faceplate to remove it.

Plug in the DVD player.

Press the eject button to open the tray.

Push up on the tray faceplate to remove it.

1024

Step 2

  • Press the eject button to re-insert the tray.
  • Unplug the DVD player after the tray is closed.

Press the eject button to re-insert the tray.

Unplug the DVD player after the tray is closed.

Step 3

  • Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.
  • Remove the 6.4 mm Phillips #1 screws on each side of the device.

Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.

Remove the 6.4 mm Phillips #1 screws on each side of the device.

Step 4

  • Remove the top plate of the DVD by firmly grasping the player on both sides.
  • Shift the top plate towards the backside of the player.
  • Lift the back half of the top plate up to remove it from the player.

Remove the top plate of the DVD by firmly grasping the player on both sides.

Shift the top plate towards the backside of the player.

Lift the back half of the top plate up to remove it from the player.

Step 5

  • Locate the motherboard within the DVD player.
  • Firmly grasp the ribbon wire and unplug it from the motherboard.

Locate the motherboard within the DVD player.

Firmly grasp the ribbon wire and unplug it from the motherboard.

Step 6

  • Firmly grasp the bundled cable connector that attaches the tray to the motherboard.
  • Gently pull upwards to remove the bundled cable connector from the motherboard.

Firmly grasp the bundled cable connector that attaches the tray to the motherboard.

Gently pull upwards to remove the bundled cable connector from the motherboard.

Step 7

  • Firmly grasp the second bundled cable connector that attaches the tray to the motherboard.
  • Gently pull upwards to remove the second bundled cable connector from the motherboard.

Firmly grasp the second bundled cable connector that attaches the tray to the motherboard.

Gently pull upwards to remove the second bundled cable connector from the motherboard.

Step 8

  • Remove the 9.0 mm #1 Phillips head screw that holds the tray to the DVD player.

Remove the 9.0 mm #1 Phillips head screw that holds the tray to the DVD player.

Step 9

  • Lift the tray out of the DVD player from the back.

Lift the tray out of the DVD player from the back.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Dyllon Phuong

Member since: 08/31/2018

513 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Western Carolina University, Team S1-G6, Virtue Fall 2018                        

                                                  Member of Western Carolina University, Team S1-G6, Virtue Fall 2018 



                    WCU-VIRTUE-F18S1G6                     


                                            3 Members                     


                                            9 Guides authored