Difficulty
Moderate
Steps
5
Time Required
20 minutes
Sections
1
- USB port
- 5 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackPhilips DVP5992-F7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
USB port
- Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.
- Remove the 6.4 mm Phillips #1 screws on each side of the device.
Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.
Remove the 6.4 mm Phillips #1 screws on each side of the device.
1024
Step 2
- Remove the top plate of the DVD by firmly grasping the player on both sides.
- Shift the top plate towards the backside of the player.
- Lift the back half of the top plate up to remove it from the player.
Remove the top plate of the DVD by firmly grasping the player on both sides.
Shift the top plate towards the backside of the player.
Lift the back half of the top plate up to remove it from the player.
Step 3
- Locate the bundled cable connectors that attaches the USB port to the motherboard.
- Firmly grasp the bundled cable connector and lift it from the motherboard.
Locate the bundled cable connectors that attaches the USB port to the motherboard.
Firmly grasp the bundled cable connector and lift it from the motherboard.
Step 4
- Locate the area behind the USB port within the interior of the DVD Player.
- Unscrew the two 6.35 mm Phillips #1 screws located behind the USB port.
Locate the area behind the USB port within the interior of the DVD Player.
Unscrew the two 6.35 mm Phillips #1 screws located behind the USB port.
Step 5
- Use the plastic opening tool to press down on the brass clip that holds the USB port in place.
- Pull back the USB Port to remove it from the DVD player.
Use the plastic opening tool to press down on the brass clip that holds the USB port in place.
Pull back the USB Port to remove it from the DVD player.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Nathan Sarti
Member since: 08/31/2018
274 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
Western Carolina University, Team S1-G6, Virtue Fall 2018
Member of Western Carolina University, Team S1-G6, Virtue Fall 2018
WCU-VIRTUE-F18S1G6
3 Members
9 Guides authored
