Difficulty

Easy

Steps

6

Time Required

                          10 minutes

Sections

2

  • Top Panel
  • 2 steps
  • Motherboard
  • 4 steps

Flags

0

  • BackPhilips DVP642

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Panel
  • Remove four 7.5 mm Phillips screws on the both sides (2 on each side).
  • Remove five 7.5 mm Phillips screws on the back of the player.

Remove four 7.5 mm Phillips screws on the both sides (2 on each side).

Remove five 7.5 mm Phillips screws on the back of the player.

1024

Step 2

  • Lift the top panel from the back and remove. It should come off without being forced. There is a lip near the front so you many need to slide the top panel back slightly to remove it.

Lift the top panel from the back and remove. It should come off without being forced. There is a lip near the front so you many need to slide the top panel back slightly to remove it.

Step 3

              Motherboard
  • Locate the first three ribbon wires.
  • Remove the ribbon wires by grasping firmly as near to the plastic head as possible and pulling.
  • Be firm, but gentle when pulling to avoid pulling the wires off the head.

Locate the first three ribbon wires.

Remove the ribbon wires by grasping firmly as near to the plastic head as possible and pulling.

Be firm, but gentle when pulling to avoid pulling the wires off the head.

Step 4

  • Remove the fourth ribbon wire as in step 2.
  • Remove the fifth ribbon wire by grasping both sides of the black clip and pulling up. When reinserting, pull black clip up, insert the ribbon wire, and push the black clip back down.

Remove the fourth ribbon wire as in step 2.

Remove the fifth ribbon wire by grasping both sides of the black clip and pulling up. When reinserting, pull black clip up, insert the ribbon wire, and push the black clip back down.

Step 5

  • Remove the following screws:
  • 7.5 mm Phillips screws (2) that secure the motherboard to the bottom panel. The screw on the top right will also be attached to a grounding wire, it is okay to remove this screw.
  • Remove the 7.5 mm Phillips screw on the bottom right that attaches the grounding wire to the disc tray.
  • 7.5 mm Phillips screws (4) on outside of player near input/output plugs.

Remove the following screws:

7.5 mm Phillips screws (2) that secure the motherboard to the bottom panel. The screw on the top right will also be attached to a grounding wire, it is okay to remove this screw.

Remove the 7.5 mm Phillips screw on the bottom right that attaches the grounding wire to the disc tray.

7.5 mm Phillips screws (4) on outside of player near input/output plugs.

Step 6

  • Remove the motherboard by pulling it back and then up gently.
  • The input/output plugs should slide out easily from the holes in the back panel.

Remove the motherboard by pulling it back and then up gently.

The input/output plugs should slide out easily from the holes in the back panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 5 other contributors 


                    Nathan Klammer

Member since: 10/06/2011

417 Reputation

                                      3 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team 21-20, Maness Fall 2011                        

                                                  Member of Cal Poly, Team 21-20, Maness Fall 2011 



                    CPSU-MANESS-F11S21G20                     


                                            4 Members                     


                                            5 Guides authored

Md Younus - Oct 11, 2021

Reply

Dvp3005/Ik mother bord .how much price