Difficulty
Moderate
Steps
12
Time Required
3 minutes
Sections
2
- Front and Back Panels
- 8 steps
- Zoom Lock Precision Notch
- 4 steps
Flags
0
BackPhilips Norelco BeardTrimmer 3100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front and Back Panels
- Remove the comb from the top of the trimmer.
Remove the comb from the top of the trimmer.
1024
Step 2
- Place your thumb underneath the blade and push upward to remove it.
Place your thumb underneath the blade and push upward to remove it.
Step 3
- Hold trimmer towards you as shown in the diagram.
- Insert your prying tool/metal spudger into the marked area.
Hold trimmer towards you as shown in the diagram.
Insert your prying tool/metal spudger into the marked area.
Step 4
- Apply gentle pressure and begin prying open the back panel.
- Separate the panel one notch at a time. Listen carefully as you’re prying the panel apart and notice each individual notch release.
Apply gentle pressure and begin prying open the back panel.
Separate the panel one notch at a time. Listen carefully as you’re prying the panel apart and notice each individual notch release.
Step 5
- Pull the trimmer apart using your hands once the panel is at least halfway apart.
- Pull the wires attached to the battery off of the power connectors before completely removing the back panel.
Pull the trimmer apart using your hands once the panel is at least halfway apart.
Pull the wires attached to the battery off of the power connectors before completely removing the back panel.
Step 6
- Hold the trimmer towards you.
- Place the metal spudger tool in the marked area.
Hold the trimmer towards you.
Place the metal spudger tool in the marked area.
Step 7
- Apply gentle pressure and begin prying the front panel.
- Separate the front panel one notch at a time.
Apply gentle pressure and begin prying the front panel.
Separate the front panel one notch at a time.
Step 8
- Pull the trimmer apart using your hands once the panel is at least halfway apart.
Step 9
Zoom Lock Precision Notch
- Locate the zoom lock precision notch in the back panel of the Beardtrimmer
Locate the zoom lock precision notch in the back panel of the Beardtrimmer
Step 10
- Set the zoom lock wheel to the lowest setting
Set the zoom lock wheel to the lowest setting
Step 11
- Rotate the trimmer so that the motor is facing you.
- Now gently push down the zoom lock wheel until the white button is not showing.
Rotate the trimmer so that the motor is facing you.
Now gently push down the zoom lock wheel until the white button is not showing.
Step 12
- Rotate the beardtrimmer again so that the battery is facing you.
- With the help of the metal spudger, apply gentle pressure on top of the wheel to remove the zoom lock precision notch .
Rotate the beardtrimmer again so that the battery is facing you.
With the help of the metal spudger, apply gentle pressure on top of the wheel to remove the zoom lock precision notch .
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
ilan
Member since: 09/03/2015
164 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 15-2, Blackwell Fall 2015
Member of USF Tampa, Team 15-2, Blackwell Fall 2015
USFT-BLACKWELL-F15S15G2
4 Members
8 Guides authored
Kartik Gusain - Aug 31, 2022
Reply
How to fix charging wire to the plate?
