Student-Contributed Wiki

An awesome team of students from our education program made this wiki.

No signs of power to the projector. If the battery has worked before and suddenly has stop holding charge or charging all together, then the battery may need to be replaced as it may be faulty.

The PicoPix should come with a charging cable. It should be charged for at least 3 hours before use.

If charging your device doesn’t fix the issue, you can replace the internal battery using this guide.

The projected image seems to be blurry or fuzzy. Before taking apart the projector and removing the LED bulb, try tweaking the focus or the moving the projector closer to the projected surface. Small dirt or dust particles can stick to the lens and appear to be artifacts in the bulb. Giving the lens a quick wipe may be able to help.

Spin the focus wheel that is above the lens to adjust the focus. Also, adjusting the distance from the projected surface will help.

Do Not Use any household glass cleaners to clean the lens. Just use a microfiber cloth.

Replacing the A/V cable can help improve image quality or fix small dots and lines that appear.

If none of the above work, you can replace the lens or display board inside the projector using this guide here.

It has both an internal speaker as well as an external input for headphones or external speakers. To determine if the internal speaker has any issues, test the volume or the audio out cable first.

Use the left and right arrows on the top of the projector to adjust the volume.

Check the audio out cable to see if it is functioning and installed properly. Adjust the volume on both the projector and the external device.

The device is very hot to the touch after being on for a short period of time.

It’s good to check the outside of the device to see if the built in vents that lead to the fan are clogged with dust, or being blocked by anything.

If there is nothing blocking airflow through the device, the internal fan might be broken/worn out. If this is the case, refer to this guide.

The device wont turn off/stop displaying.

Check the state of the power button on the side of the device; make sure it’s all the way in the off position.