Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

2

  • Philips Satinelle Disassembly
  • 7 steps
  • Gear Replacement
  • 1 step

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackPhilips Satinelle Essential

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Philips Satinelle Disassembly
  • Unplug the device and remove the purple guard.
  • Remove the head by pressing the right side of the head (with the device facing away from you).
  • You will hear a ‘click’ and the head will become dislodged from the body of the device.

Unplug the device and remove the purple guard.

Remove the head by pressing the right side of the head (with the device facing away from you).

You will hear a ‘click’ and the head will become dislodged from the body of the device.

1024

Step 2

  • While wearing safety glasses, use a plastic opening tool to pry from right to left to pry out the tensor clip.
  • Be careful not to lose the clip. It will likely fly off when it releases.

While wearing safety glasses, use a plastic opening tool to pry from right to left to pry out the tensor clip.

Be careful not to lose the clip. It will likely fly off when it releases.

Step 3

  • The left side will swing down.
  • Remove the Tweezers.

The left side will swing down.

Remove the Tweezers.

Step 4

  • Remove the plastic component that swings down.
  • Use fingernails to lift clips from stubs.

Remove the plastic component that swings down.

Use fingernails to lift clips from stubs.

Step 5

  • Using Needle Nose pliers remove metal roller track on both sides of the Tweezers Head.

Using Needle Nose pliers remove metal roller track on both sides of the Tweezers Head.

Step 6

  • Use a spudger to pry the gear housing unit from the base.

Use a spudger to pry the gear housing unit from the base.

Step 7

  • Use your thumbnail and a pair of needle nose pliers to push out the gear housing retention pin.

Use your thumbnail and a pair of needle nose pliers to push out the gear housing retention pin.

Step 8

              Gear Replacement
  • Replace the gear and re-insert the pin.
  • Ensure that pin is protruding slightly, it should not be flush.

Replace the gear and re-insert the pin.

Ensure that pin is protruding slightly, it should not be flush.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Nathan Christian

Member since: 11/11/2017

490 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       IUPUI, Team S5-G5, Wilson Fall 2017                        

                                                  Member of IUPUI, Team S5-G5, Wilson Fall 2017 



                    IUPUI-WILSON-F17S5G5                     


                                            3 Members                     


                                            4 Guides authored

Wilkis James - Nov 9, 2022

Reply

What size pinion is used in it? Kindly help.