Difficulty

Moderate

Steps

7

Time Required

                          20 - 30 minutes

Sections

2

  • Battery Casing
  • 3 steps
  • Speaker
  • 4 steps

Flags

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackPhilips SBA1610

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Casing
  • Remove the back cover by sliding it off.
  • Remove the 3 AAA batteries.

Remove the back cover by sliding it off.

Remove the 3 AAA batteries.

1024

Step 2

  • Unscrew the nine exterior screws on the back panel using a PH0-size Philips-head screwdriver.
  • NOTE: A larger screwdriver head and more force may be required for damaged screws.
  • Remove the triangular end piece by pulling it straight off.

Unscrew the nine exterior screws on the back panel using a PH0-size Philips-head screwdriver.

NOTE: A larger screwdriver head and more force may be required for damaged screws.

Remove the triangular end piece by pulling it straight off.

Step 3

  • Remove the colored grill by sliding it off in the direction of the removed end piece.
  • Pry off the back battery panel with the plastic opening tool.
  • NOTE: Be careful to avoid tearing any wires.

Remove the colored grill by sliding it off in the direction of the removed end piece.

Pry off the back battery panel with the plastic opening tool.

NOTE: Be careful to avoid tearing any wires.

Step 4

              Speaker
  • Remove the circuit board by unscrewing the two interior screws located on the circuit board.
  • Pull out the battery plugs from the circuit board by pulling out the plugs to fully remove the back panel from the rest of the speaker.

Remove the circuit board by unscrewing the two interior screws located on the circuit board.

Pull out the battery plugs from the circuit board by pulling out the plugs to fully remove the back panel from the rest of the speaker.

Step 5

  • Locate the speaker needing replacing.
  • Remove the one screw holding the speaker in place with a PH0 size philips head screw driver.

Locate the speaker needing replacing.

Remove the one screw holding the speaker in place with a PH0 size philips head screw driver.

Step 6

  • Score the glue that is holding the speaker in place with the spudger, and use your hands to pry off the speaker.

Score the glue that is holding the speaker in place with the spudger, and use your hands to pry off the speaker.

Step 7

  • Using a non-conductive glue, carefully seal the speaker to the casing.
  • Follow the glue instructions as set by the manufacturers. Let the glue set the appropriate amount of time.
  • Reassemble the device

Using a non-conductive glue, carefully seal the speaker to the casing.

Follow the glue instructions as set by the manufacturers. Let the glue set the appropriate amount of time.

Reassemble the device

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    April Driscoll

Member since: 10/21/2013

321 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Clemson, Team 14-4, Benson Fall 2013                        

                                                  Member of Clemson, Team 14-4, Benson Fall 2013 



                    CLEM-BENSON-F13S14G4                     


                                            3 Members                     


                                            4 Guides authored