Difficulty

Moderate

Steps

5

Time Required

                          20 minutes

Sections

1

  • Battery
  • 5 steps

Flags

2

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackPhilips TAS7505

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the rubber cover from the bottom of the speaker using your opening tool.
  • However, this will make it much harder to place the rubber cover back where it was and may not stick, but it is unnecessary for the speaker to function.

Remove the rubber cover from the bottom of the speaker using your opening tool.

However, this will make it much harder to place the rubber cover back where it was and may not stick, but it is unnecessary for the speaker to function.

1024

Step 2

  • Get your Philips 0 bit screwdriver and remove the 4 screws attached to the cover and then remove the cover with the opening tool that you used for the rubber cover.

Get your Philips 0 bit screwdriver and remove the 4 screws attached to the cover and then remove the cover with the opening tool that you used for the rubber cover.

Step 3

  • Remove all the screws using the same screwdriver to remove the final layers to open up the inside.

Remove all the screws using the same screwdriver to remove the final layers to open up the inside.

Step 4

  • After opening the Philips speaker, remove the battery from the motherboard.
  • The cable that connects the battery to the speaker is attached to small pins. You can use your hands to wiggle the battery out.

After opening the Philips speaker, remove the battery from the motherboard.

The cable that connects the battery to the speaker is attached to small pins. You can use your hands to wiggle the battery out.

Step 5

  • After removing your battery. Get your replacement battery and place it in. Then Redo the steps form the bottom to the top.

After removing your battery. Get your replacement battery and place it in. Then Redo the steps form the bottom to the top.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Frederick Jimenez

Member since: 09/26/2022

277 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       CSU Los Angeles, Team 5-2, Adachi Fall 2022                        

                                                  Member of CSU Los Angeles, Team 5-2, Adachi Fall 2022 



                    CSULA-ADACHI-F22S5G2                     


                                            5 Members                     


                                            5 Guides authored