Difficulty
Easy
Steps
7
Time Required
5 minutes
Sections
2
- Battery
- 3 steps
- Buttons
- 4 steps
Flags
0
BackVTech Touch and Swipe Baby Phone
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Using a Phillips #1 screwdriver, remove the 4.8mm screw on the battery cover by twisting the screwdriver counter-clockwise.
Using a Phillips #1 screwdriver, remove the 4.8mm screw on the battery cover by twisting the screwdriver counter-clockwise.
1024
Step 2
- Remove the two AAA batteries by pulling on one end of the battery and lifting it straight out.
Remove the two AAA batteries by pulling on one end of the battery and lifting it straight out.
Step 3
- When reassembling, align the notch on the battery panel with the slot on the phone.
When reassembling, align the notch on the battery panel with the slot on the phone.
Step 4
Buttons
- Remove 4 13.8mm screws holding the device back using a Phillips #1 screw driver.
Remove 4 13.8mm screws holding the device back using a Phillips #1 screw driver.
Step 5
- Removed 1 4.8mm phillips head screw with a #0 Phillips head screw driver and lift away battery back being conscientious of wires.
Removed 1 4.8mm phillips head screw with a #0 Phillips head screw driver and lift away battery back being conscientious of wires.
Step 6
- Carefully remove the button board to gain access to the buttons.
Carefully remove the button board to gain access to the buttons.
Step 7
- Carefully remove each button from the baby phone.
- When handling buttons be sure not to misplace the button contacts.
Carefully remove each button from the baby phone.
When handling buttons be sure not to misplace the button contacts.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
tellocordova
Member since: 09/04/2015
342 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 2-4, Sullivan Fall 2015
Member of USF Tampa, Team 2-4, Sullivan Fall 2015
USFT-SULLIVAN-F15S2G4
3 Members
6 Guides authored