Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

  • Face Plate and Back Plate
  • 5 steps
  • Battery (Prerequisite)
  • 2 steps

Flags

3

Mismatched Prerequisites

This guide does not have a proper prerequisite guide. Help match it to its ideal partner by finding it or writing one!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

  • BackPhotive Hydra

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Face Plate and Back Plate
  • Unscrew all twelve Hex Head 1.5 (Length-3/8", Head- 1/8") screws using a 1.5mm hex screwdriver.

Unscrew all twelve Hex Head 1.5 (Length-3/8", Head- 1/8") screws using a 1.5mm hex screwdriver.

1024

Step 2

  • Use a plastic opening tool to pry off the face plate.

Use a plastic opening tool to pry off the face plate.

Step 3

  • Remove the rubber casing by using your fingers to pull off. Be sure not tear or rip rubber casing.

Remove the rubber casing by using your fingers to pull off. Be sure not tear or rip rubber casing.

Step 4

  • Flip the device upside down and remove all eight Phillips (Length-3/8", Head-1/8") Screws using a standard #1 Phillips screwdriver.

Flip the device upside down and remove all eight Phillips (Length-3/8", Head-1/8") Screws using a standard #1 Phillips screwdriver.

Step 5

  • Use plastic opening tool to pry off back plate.
  • Move the plastic opening tool along the the device to further pry open the device.
  • Be careful when taking this plate off. You may accidentally damage the water proof seal.

Use plastic opening tool to pry off back plate.

Move the plastic opening tool along the the device to further pry open the device.

Be careful when taking this plate off. You may accidentally damage the water proof seal.

Step 6

              Battery (Prerequisite)
  • Identify the two Phillips (Length-5/16", Head-1/8") screws holding the battery in place and remove them using a #1 screwdriver.

Identify the two Phillips (Length-5/16", Head-1/8") screws holding the battery in place and remove them using a #1 screwdriver.

Step 7

  • Remove the ICR18650-26M battery from its position by pulling upwards and out of the casing.

Remove the ICR18650-26M battery from its position by pulling upwards and out of the casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Matthew Knight

Member since: 02/09/2016

246 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 11-3, Cheng Spring 2016                        

                                                  Member of USF Tampa, Team 11-3, Cheng Spring 2016 



                    USFT-CHENG-S16S11G3                     


                                            5 Members                     


                                            6 Guides authored

Terry - Nov 22, 2022

Reply

Great instructions, I replaced the battery and it works fine.

THANKS!