Pine64 Pinephone Charging Port Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Back Cover
2 steps
Charging Port
4 steps

Flags

BackPine64 PinePhone
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Before beginning, inspect the inside of the port and remove any debris inside. If the phone still refuses to charge, or only charges at certain angles, proceed.

What you need

Step 1

              Back Cover

Place the device face down on a non-scratch surface.

Place the device face down on a non-scratch surface.

1024

Step 2

Using a fingernail pry open the back cover off with the bottom left indent.

Using a fingernail pry open the back cover off with the bottom left indent.

Step 3

              Charging Port

Using a Phillips #000 screwdriver, remove each of the screws around the perimeter of the PinePhone.
Remove the battery.

Using a Phillips #000 screwdriver, remove each of the screws around the perimeter of the PinePhone.

Remove the battery.

Step 4

Remove the midframe from the phone.

Remove the midframe from the phone.

Step 5

Carefully lift up the vibrator, connected to the board by two wires.

Carefully lift up the vibrator, connected to the board by two wires.

Step 6

Applying even pressure, lift up the board.
An adhesive is all that is keeping it to the frame of the phone, so there should be minimum resistance.
With a new adhesive strip, connect the replacement board to the frame. Make sure to secure the vibrator in the same place as the original.

Applying even pressure, lift up the board.

An adhesive is all that is keeping it to the frame of the phone, so there should be minimum resistance.

With a new adhesive strip, connect the replacement board to the frame. Make sure to secure the vibrator in the same place as the original.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Chandler Marlow

Member since: 09/17/2021

118 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Western Carolina University, Team 1-2, Virtue Fall 2021                        

                                                  Member of Western Carolina University, Team 1-2, Virtue Fall 2021 



                    WCU-VIRTUE-F21S1G2                     


                                            4 Members                     


                                            2 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team