Difficulty
Moderate
Steps
5
Time Required
7 minutes
Sections
2
- Back Panel
- 4 steps
- Motherboard
- 1 step
Flags
0
BackPioneer A1 XW-SMA1-K
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Use the spudger to remove the mesh front panel.
Use the spudger to remove the mesh front panel.
1024
Step 2
- Use a Phillips #1 screwdriver to remove the thirteen 12 mm screws in the speaker frame.
- Remove the speaker frame by pulling vertically upwards revealing the motherboard.
Use a Phillips #1 screwdriver to remove the thirteen 12 mm screws in the speaker frame.
Remove the speaker frame by pulling vertically upwards revealing the motherboard.
Step 3
- Use a Phillips #1 screwdriver to remove the twelve 12 mm screws from the middle frame.
- Remove the middle frame by pulling upward and vertically.
Use a Phillips #1 screwdriver to remove the twelve 12 mm screws from the middle frame.
Remove the middle frame by pulling upward and vertically.
Step 4
- Use the Phillips #1 screwdriver to remove the nine 12 mm screws from the motherboard.
- Flip the motherboard over.
- Remove the motherboard by detaching the antenna.
Use the Phillips #1 screwdriver to remove the nine 12 mm screws from the motherboard.
Flip the motherboard over.
Remove the motherboard by detaching the antenna.
Step 5
Motherboard
- Remove the motherboard from the speaker.
Remove the motherboard from the speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
john adewoye
Member since: 02/14/2019
73 Reputation
1 Guide authored
Badges:
2
Team
Carson-Newman University, Team S1-G2, Sobiech Spring 2019
Member of Carson-Newman University, Team S1-G2, Sobiech Spring 2019
CNU-SOBIECH-S19S1G2
5 Members
5 Guides authored
