Pioneer Elite Pro Ro6U Cooling Fan Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          10 - 15 minutes            

Sections

1

• Power Supply Cooling Fan
• 6 steps

Flags

0

• BackPioneer Elite PRO-RO6U

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

cooling fan will make it difficult for the media receiver to dissipate heat, and is the most likely cause of overheating. This guide will show you how to replace the power supply cooling fan.

What you need

Step 1

              Power Supply Cooling Fan               

• Remove the two 6.4 mm Phillips screws on each side of the device’s casing.

Remove the two 6.4 mm Phillips screws on each side of the device’s casing.

1024

Step 2

• Remove the two 6.5 mm Phillips screws on the back of the device casing.

Remove the two 6.5 mm Phillips screws on the back of the device casing.

Step 3

• Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

Step 4

• To replace the back cooling fan, grip the ribbon connector at slot M10 and remove by gently pulling upward.

To replace the back cooling fan, grip the ribbon connector at slot M10 and remove by gently pulling upward.

Step 5

• Remove the two 6.5 mm Phillips mounting screws at the back of the device.

Remove the two 6.5 mm Phillips mounting screws at the back of the device.

Step 6

• Grip the frame of the cooling fan and slide away from the back wall until the tabs are no longer in the holes of the casing.
• Lift the cooling fan out of the device.

Grip the frame of the cooling fan and slide away from the back wall until the tabs are no longer in the holes of the casing.

Lift the cooling fan out of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Cody Carter                     

Member since: 01/30/2018

1,049 Reputation

                                      6 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Baylor, Team S1-G5, Johnson Spring 2018                        

                                                  Member of Baylor, Team S1-G5, Johnson Spring 2018 



                    BU-JOHNSON-S18S1G5                     


                                            3 Members                     


                                            6 Guides authored