Pioneer Fh X730Bs Auxiliary Inlet Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          30 minutes

Sections

Deck Buttons
3 steps
Auxiliary Inlet
1 step

Flags

BackPioneer FH-X730BS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Deck Buttons

Apply pressure to the tabs on each side using the plastic opening tool.
You will need to pull the face away from the frame while unhooking the tabs.

Apply pressure to the tabs on each side using the plastic opening tool.

You will need to pull the face away from the frame while unhooking the tabs.

1024

Step 2

After removing the stereo face from the frame it should look similar to this.
Remove the seven 11.2mm Phillips #1 screws on the rear side of the stereo face.

After removing the stereo face from the frame it should look similar to this.

Remove the seven 11.2mm Phillips #1 screws on the rear side of the stereo face.

Step 3

Remove the volume knob by pulling it towards you and pull the motherboard out of the face.
The audio buttons can now be taken out. You can flip the face downwards and tap the audio buttons.
You can now insert the replacement audio buttons into the face.

Remove the volume knob by pulling it towards you and pull the motherboard out of the face.

The audio buttons can now be taken out. You can flip the face downwards and tap the audio buttons.

You can now insert the replacement audio buttons into the face.

Step 4

              Auxiliary Inlet

Here you are able to desolder the auxiliary ports from the circuit board and solder a replacement auxiliary port on.
The end of the soldering iron will be hot.

Here you are able to desolder the auxiliary ports from the circuit board and solder a replacement auxiliary port on.

The end of the soldering iron will be hot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Cody Pesta

Member since: 09/17/2018

688 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Washington State, Team S2-G4, Hope Fall 2018                        

                                                  Member of Washington State, Team S2-G4, Hope Fall 2018 



                    WSU-HOPE-F18S2G4                     


                                            3 Members                     


                                            6 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team