Difficulty
Moderate
Steps
3
Time Required
10 minutes
Sections
1
- Deck Buttons
- 3 steps
Flags
0
BackPioneer FH-X730BS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Deck Buttons
- Apply pressure to the tabs on each side using the plastic opening tool.
- You will need to pull the face away from the frame while unhooking the tabs.
Apply pressure to the tabs on each side using the plastic opening tool.
You will need to pull the face away from the frame while unhooking the tabs.
1024
Step 2
- After removing the stereo face from the frame it should look similar to this.
- Remove the seven 11.2mm Phillips #1 screws on the rear side of the stereo face.
After removing the stereo face from the frame it should look similar to this.
Remove the seven 11.2mm Phillips #1 screws on the rear side of the stereo face.
Step 3
- Remove the volume knob by pulling it towards you and pull the motherboard out of the face.
- The audio buttons can now be taken out. You can flip the face downwards and tap the audio buttons.
- You can now insert the replacement audio buttons into the face.
Remove the volume knob by pulling it towards you and pull the motherboard out of the face.
The audio buttons can now be taken out. You can flip the face downwards and tap the audio buttons.
You can now insert the replacement audio buttons into the face.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Cody Pesta
Member since: 09/17/2018
688 Reputation
6 Guides authored
Badges:
8
+5 more badges
Team
Washington State, Team S2-G4, Hope Fall 2018
Member of Washington State, Team S2-G4, Hope Fall 2018
WSU-HOPE-F18S2G4
3 Members
6 Guides authored