Difficulty
Moderate
Steps
5
Time Required
20 minutes
Sections
1
- Buttons
- 5 steps
Flags
0
BackPioneer MXT-X366BT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Buttons
- Press the button on the bottom right hand corner firmly to release face plate.
- Firmly pull out the face plate.
- The face plate will now be free.
Press the button on the bottom right hand corner firmly to release face plate.
Firmly pull out the face plate.
The face plate will now be free.
1024
Step 2
- Use a Phillips #1 screwdriver to unscrew the three 3mm Phillips-head screws on the rear of the faceplate.
Use a Phillips #1 screwdriver to unscrew the three 3mm Phillips-head screws on the rear of the faceplate.
Step 3
- Press clips inward with the plastic opening tool to release the rear of the head unit.
Press clips inward with the plastic opening tool to release the rear of the head unit.
Step 4
- Remove the motherboard from the casing.
- Handle the motherboard with care.
Remove the motherboard from the casing.
Handle the motherboard with care.
Step 5
- Pull out the buttons.
- Remember the orientation of the buttons.
Pull out the buttons.
Remember the orientation of the buttons.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Travis Mason
Member since: 03/22/2018
193 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
Sam Houston State, Team S17-G7, Blackburne Spring 2018
Member of Sam Houston State, Team S17-G7, Blackburne Spring 2018
SHSU-BLACKBURNE-S18S17G7
4 Members
5 Guides authored
