Pioneer Mxt X366Bt Metal Case Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          20 - 30 minutes            

Sections

1

• Metal Casing
• 7 steps

Flags

0

• BackPioneer MXT-X366BT

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Note: The radio must be removed from the vehicle for this guide. If the radio is currently installed in the vehicle, removal may require special assistance.

What you need

Step 1

              Metal Casing               

• Apply small amount of pressure inward with a plastic opening tool to release bottom clip.
• Pry the top clip with the plastic opening tool to release it.
• The head unit is symmetrical and has the same amount of clips on the other side.

Apply small amount of pressure inward with a plastic opening tool to release bottom clip.

Pry the top clip with the plastic opening tool to release it.

The head unit is symmetrical and has the same amount of clips on the other side.

1024

Step 2

• Remove the face plate holder.

Remove the face plate holder.

Step 3

• Remove the six 5mm Phillips-head screws with Philips #2 screwdriver.

Remove the six 5mm Phillips-head screws with Philips #2 screwdriver.

Step 4

• Remove the inner three 5mm Phillips head screws, with a Phillips #2 screwdriver, attached to the metal backing.
• Remove the metal backing that is now free.

Remove the inner three 5mm Phillips head screws, with a Phillips #2 screwdriver, attached to the metal backing.

Remove the metal backing that is now free.

Step 5

• Carefully slide the metal casing forward.
• Metal piece standing is the rear of the head unit.
• Edges are sharp.

Carefully slide the metal casing forward.

Metal piece standing is the rear of the head unit.

Edges are sharp.

Step 6

• Lift the metal casing from the rear and pull it away.
• Edges are sharp.

Lift the metal casing from the rear and pull it away.

Step 7

• The metal casing is now fully removed.

The metal casing is now fully removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Blaine Kaiser                     

Member since: 03/22/2018

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Sam Houston State, Team S17-G7, Blackburne Spring 2018                        

                                                  Member of Sam Houston State, Team S17-G7, Blackburne Spring 2018 



                    SHSU-BLACKBURNE-S18S17G7                     


                                            4 Members                     


                                            5 Guides authored