Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Battery and Grip Panels
- 3 steps
Flags
0
BackPlanet Eclipse Etha
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery and Grip Panels
- Use the 5/64" hex key to remove the screw shown.
- Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.
- If you are only replacing the battery, skip the next step.
- The screws in this guide are interchangeable with those shown in the Eyes replacement guide.
Use the 5/64" hex key to remove the screw shown.
Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.
If you are only replacing the battery, skip the next step.
The screws in this guide are interchangeable with those shown in the Eyes replacement guide.
1024
Step 2
- Flip the marker over and use the 5/64" hex key to remove the screw shown.
- Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.
Flip the marker over and use the 5/64" hex key to remove the screw shown.
Step 3
- Carefully remove the 9V battery and connector.
- Remove the 9V battery from the connector.
Carefully remove the 9V battery and connector.
Remove the 9V battery from the connector.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Jared Olson
Member since: 10/14/2014
211 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 10-42, Amido Fall 2014
Member of Cal Poly, Team 10-42, Amido Fall 2014
CPSU-AMIDO-F14S10G42
5 Members
7 Guides authored
