Difficulty

Easy

Steps

7

Time Required

                          15 - 30 minutes

Sections

1

  • Bolt O-rings
  • 7 steps

Flags

0

  • BackPlanet Eclipse Etha

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bolt O-rings
  • Using the 1/4" hex key, turn the bolt counterclockwise and remove.

Using the 1/4" hex key, turn the bolt counterclockwise and remove.

1024

Step 2

  • Slide the bolt tip and spring off of the main assembly.
  • Keep a towel handy, you may get some grease on your hands.

Slide the bolt tip and spring off of the main assembly.

Keep a towel handy, you may get some grease on your hands.

Step 3

  • Unscrew the casing from the rest of the bolt.
  • Again, you may get some grease on your hands during this step.

Unscrew the casing from the rest of the bolt.

Again, you may get some grease on your hands during this step.

Step 4

  • Grab the flat surface shown.
  • Unscrew this portion counter clockwise to remove it.
  • If you’re having trouble unscrewing the part, try using a small wrench.

Grab the flat surface shown.

Unscrew this portion counter clockwise to remove it.

If you’re having trouble unscrewing the part, try using a small wrench.

Step 5

  • Grab the threaded cover and slide it away from the spring.
  • The bolt should now be in three pieces.
  • The threaded cover is the same part that you unscrewed in the last step.

Grab the threaded cover and slide it away from the spring.

The bolt should now be in three pieces.

The threaded cover is the same part that you unscrewed in the last step.

Step 6

  • Replace and lubricate the 9 marked O-rings.
  • O-ring removal will be explained in the next step.

Replace and lubricate the 9 marked O-rings.

O-ring removal will be explained in the next step.

Step 7

  • Grab the O-ring on the sides.
  • Pinch the O-ring upwards to create a gap between the metal and the ring.
  • Use a small object to slip into the loop and pull the O-ring off gently.
  • We recommend using a small Allen Key for this.

Grab the O-ring on the sides.

Pinch the O-ring upwards to create a gap between the metal and the ring.

Use a small object to slip into the loop and pull the O-ring off gently.

We recommend using a small Allen Key for this.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    nicholasj6

Member since: 10/14/2014

261 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 10-42, Amido Fall 2014                        

                                                  Member of Cal Poly, Team 10-42, Amido Fall 2014 



                    CPSU-AMIDO-F14S10G42                     


                                            5 Members                     


                                            7 Guides authored