Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes

Sections

2

  • Battery and Grip Panels
  • 3 steps
  • Trigger
  • 3 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackPlanet Eclipse Etha

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery and Grip Panels
  • Use the 5/64" hex key to remove the screw shown.
  • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.
  • If you are only replacing the battery, skip the next step.
  • The screws in this guide are interchangeable with those shown in the Eyes replacement guide.

Use the 5/64" hex key to remove the screw shown.

Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

If you are only replacing the battery, skip the next step.

The screws in this guide are interchangeable with those shown in the Eyes replacement guide.

1024

Step 2

  • Flip the marker over and use the 5/64" hex key to remove the screw shown.
  • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

Flip the marker over and use the 5/64" hex key to remove the screw shown.

Step 3

  • Carefully remove the 9V battery and connector.
  • Remove the 9V battery from the connector.

Carefully remove the 9V battery and connector.

Remove the 9V battery from the connector.

Step 4

              Trigger
  • Use a hex key to unscrew the middle screw on the top of the trigger.

Use a hex key to unscrew the middle screw on the top of the trigger.

Step 5

  • Use same hex key to push through trigger retention pin on the side of the gun.

Use same hex key to push through trigger retention pin on the side of the gun.

Step 6

  • Pull out the trigger by grabbing the bottom and slowly rotating outwards.

Pull out the trigger by grabbing the bottom and slowly rotating outwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Evan Hench

Member since: 10/19/2014

211 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 10-42, Amido Fall 2014                        

                                                  Member of Cal Poly, Team 10-42, Amido Fall 2014 



                    CPSU-AMIDO-F14S10G42                     


                                            5 Members                     


                                            7 Guides authored