Difficulty
Moderate
Steps
2
Time Required
15 minutes
Sections
1
- Battery
- 2 steps
Flags
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackPlantronics WH100 Savi Go
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Spare parts: 1 piece battery Plantronics 70868-01 Li-ion-plm 0.444Wh
The housing CANNOT be opened non-destructively, the housing is not designed for repair. The two halves of the thick electronics compartment are held together by four tabs. The tabs are glued. The binding points on the microphone neck remain closed during the repair.
To gently open the electronics compartment, the 4 tabs must be separated. The tab positions are 20mm and 52mm from the rear of the headset.
2 options:
A: Cut tab
or B: Mill a groove on each side of the housing at the specified positions to expose the lug. Release the tabs and open the housing.
Desolder the battery, change it and solder in the new battery.
Temporarily plug the housing together and charge the headset.
If it works, close the case
A: If the tabs were cut off, secure the case halves with tape or reattach them with liquid glue.
B: After changing the battery, re-glue the tabs of the housing cover to the underside of the housing and close the grooves evenly.
What you need
Step 1
Battery
- Tab positions at 20mm and 52mm from case end
Tab positions at 20mm and 52mm from case end
1024
Step 2
- Battery Plantronics 70868-01
Battery Plantronics 70868-01
Cancel: I did not complete this guide.
oldturkey03 is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
oldturkey03
Author
with 1 other contributor
Sascha Köppel
Member since: 09/03/2017
85 Reputation
1 Guide authored
Badges:
1
