Play Chair Padded Seat Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes

Sections

Padded Seat
11 steps

Flags

BackPlay Chair
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Padded Seat

Gather your materials suggested for this project.

Gather your materials suggested for this project.

1024

Step 2

Unscrew the padded seat from the chair frame. Remove the chair frame from chair seat. Remove the hinges from the padded seat and save for reassembly.

Unscrew the padded seat from the chair frame. Remove the chair frame from chair seat. Remove the hinges from the padded seat and save for reassembly.

Step 3

Remove the staples from the bottom seat to remove fabric and padding. We found that using a flat head screwdriver, and a tongue-groove pliers worked best to remove staples.

Remove the staples from the bottom seat to remove fabric and padding. We found that using a flat head screwdriver, and a tongue-groove pliers worked best to remove staples.

Step 4

Measure the seat to fit fabric and padding to the seat.

Measure the seat to fit fabric and padding to the seat.

Step 5

Measure and cut the padding according to fit the seat measurements.

Measure and cut the padding according to fit the seat measurements.

Step 6

Measure and cut the vinyl fabric according to the seat measurements.

Measure and cut the vinyl fabric according to the seat measurements.

Step 7

Inserts slits in the padding where the hinges will attach the seat to the chair frame.

Inserts slits in the padding where the hinges will attach the seat to the chair frame.

Step 8

With proper safety attire including gloves and safety goggles attach the padding to the seat with staple gun. Using a tongue-grove pliers gently hammer the staples all the way into the padded seat.

With proper safety attire including gloves and safety goggles attach the padding to the seat with staple gun. Using a tongue-grove pliers gently hammer the staples all the way into the padded seat.

Step 9

Attach the vinyl to the chair with a staple gun.

Attach the vinyl to the chair with a staple gun.

Step 10

Insert the hinges into chair seat. Place the screw into the hinge, and then screw the chair frame to the chair seat. We found it helpful to have another person hold the chair frame while another person screwed the screws in.

Insert the hinges into chair seat. Place the screw into the hinge, and then screw the chair frame to the chair seat. We found it helpful to have another person hold the chair frame while another person screwed the screws in.

Step 11

This is what the finished project should look like.

This is what the finished project should look like.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Kimberly Kennaley

Member since: 10/20/2017

119 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Missouri Western, Team S1-G15, Adkins Fall 2017                        

                                                  Member of Missouri Western, Team S1-G15, Adkins Fall 2017 



                    MWSU-ADKINS-F17S1G15                     


                                            3 Members                     


                                            1 Guide authored

Introduction#

What you need#

Team#

Introduction

What you need

Team