Difficulty

Easy

Steps

22

Time Required

                          5 minutes

Sections

6

  • Removing Playstation 2 Slimline SCPH-7500x Outer Shell
  • 7 steps
  • IR Sensor
  • 1 step
  • Clock Battery
  • 2 steps
  • Fan
  • 3 steps
  • Optical Drive
  • 5 steps
  • Metal Chassis
  • 4 steps

Flags

5

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Missed a Step

Oops! This guide is currently missing some important steps.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

  • BackPlayStation 2 Slimline SCPH-7500x

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing Playstation 2 Slimline SCPH-7500x Outer Shell
  • Turn off the PlayStation 2 and carefully unplug it from the power source. Also, it is important to eject the CD from the console before flipping the it upside down.

Turn off the PlayStation 2 and carefully unplug it from the power source. Also, it is important to eject the CD from the console before flipping the it upside down.

1024

Step 2

  • Locate the six feet on the bottom of the PS2.
  • Five of these feet are in plain sight while the last foot is located under the black void sticker on the back of the device.
  • Some versions of the console, such as the PAL Version, may not have this sticker. In this case, the foot or the screw should be in plain sight.

Locate the six feet on the bottom of the PS2.

Five of these feet are in plain sight while the last foot is located under the black void sticker on the back of the device.

Some versions of the console, such as the PAL Version, may not have this sticker. In this case, the foot or the screw should be in plain sight.

Step 3

  • Remove the five visible feet from the bottom of the device using a spudger.

Remove the five visible feet from the bottom of the device using a spudger.

Step 4

  • Remove the sticker and then remove the 6th foot.

Remove the sticker and then remove the 6th foot.

Step 5

  • After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2.

After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2.

Step 6

  • Once all of the screws have been removed, pry apart the plastic covers. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate the two sides.
  • You may need to apply some gentle force to detach the covers. Be careful not to break the plastic screw pins.

Once all of the screws have been removed, pry apart the plastic covers. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate the two sides.

You may need to apply some gentle force to detach the covers. Be careful not to break the plastic screw pins.

Step 7

  • If done correctly, you should have a fully detached plastic backing, revealing the electronic components of the PlayStation 2.

If done correctly, you should have a fully detached plastic backing, revealing the electronic components of the PlayStation 2.

Step 8

              IR Sensor
  • Locate the IR sensor on the motherboard. Then, use tweezers to gently detach the blue/white ribbon that attaches the IR sensor to the motherboard.

Locate the IR sensor on the motherboard. Then, use tweezers to gently detach the blue/white ribbon that attaches the IR sensor to the motherboard.

Step 9

              Clock Battery
  • Identify the clock battery, then use tweezers to disconnect the connector from the motherboard.

Identify the clock battery, then use tweezers to disconnect the connector from the motherboard.

Step 10

  • Gently lift the battery up from the battery compartment using a spudger.

Gently lift the battery up from the battery compartment using a spudger.

Step 11

              Fan
  • Locate the fan component of the motherboard of the PS2.
  • With your fingers or tweezers, peel off the sticker that holds down the fan’s wiring.

Locate the fan component of the motherboard of the PS2.

With your fingers or tweezers, peel off the sticker that holds down the fan’s wiring.

Step 12

  • Detach the terminal (white covering) to the red and yellow cords from the motherboard to the fan with the use of tweezers.

Detach the terminal (white covering) to the red and yellow cords from the motherboard to the fan with the use of tweezers.

Step 13

  • Locate and unscrew the three 1.6mm screws located next to the base of the fan.
  • They are located off the curved edge of the fan.
  • Once you have removed the three screws, you are able to remove the fan from the PS2.

Locate and unscrew the three 1.6mm screws located next to the base of the fan.

They are located off the curved edge of the fan.

Once you have removed the three screws, you are able to remove the fan from the PS2.

Step 14

              Optical Drive
  • Locate the optical drive on the motherboard.

Locate the optical drive on the motherboard.

Step 15

  • Unscrew the four 4.0mm screws that mount the optical drive to the motherboard.

Unscrew the four 4.0mm screws that mount the optical drive to the motherboard.

Step 16

  • Locate the three ribbons that are attached to the motherboard.
  • Note: These ribbons are different sizes: one large, one medium and one small sized ribbon.

Locate the three ribbons that are attached to the motherboard.

Note: These ribbons are different sizes: one large, one medium and one small sized ribbon.

Step 17

  • Using tweezers, gently detach all three ribbons from the motherboard terminal. Unlock the middle orange ribbon to lift the black tab up on either side.
  • IMPORTANT: The orange ribbon is glued to the metal chassis. Gently pull the ribbon upward to make sure that you don’t rip it.

Using tweezers, gently detach all three ribbons from the motherboard terminal. Unlock the middle orange ribbon to lift the black tab up on either side.

IMPORTANT: The orange ribbon is glued to the metal chassis. Gently pull the ribbon upward to make sure that you don’t rip it.

Step 18

  • Gently lift the optical drive away from the motherboard.

Gently lift the optical drive away from the motherboard.

Step 19

              Metal Chassis
  • Locate the metal plate that is attached to the back of the motherboard.

Locate the metal plate that is attached to the back of the motherboard.

Step 20

  • Locate the six 1.6mm screws that mount the metal plate to the motherboard.

Locate the six 1.6mm screws that mount the metal plate to the motherboard.

Step 21

  • Unscrew all six 1.6mm screws that mount the metal plate to the motherboard.

Unscrew all six 1.6mm screws that mount the metal plate to the motherboard.

Step 22

  • Gently lift the metal plates from both the top and bottom of the motherboard.

Gently lift the metal plates from both the top and bottom of the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 11 other contributors 


                    Jared Hirata

Member since: 04/09/2013

669 Reputation

                                      7 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 17-4, Regan Spring 2013                        

                                                  Member of Cal Poly, Team 17-4, Regan Spring 2013 



                    CPSU-REGAN-S13S17G4                     


                                            3 Members                     


                                            21 Guides authored